Make sure this part fits

Chevrolet 20833675 Front Shock Absorber Assembly

2009-2010 Chevrolet

Customer Questions & Expert Answers (19)
GM 20833675 Front Shock Absorber Assembly
  • Part Description
    Absorber Assembly, Front Shock ; Absorber, Front And Rear Suspension
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$74.84 MSRP: $212.15
You Save: $137.31 (65%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number20833675
    Part DescriptionAbsorber Assembly, Front Shock ; Absorber, Front And Rear Suspension
    Other NamesStrut
    Item Dimensions27.8 x 6.3 x 6.2 inches
    Item Weight24.10 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU20833675
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009-2010 Chevrolet Avalanche8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L1/2 TON
    2009-2010 Chevrolet Silverado6 Cyl 4.3L, 8 Cyl 4.8L, 8 Cyl 4.8L Flex, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L FlexCREW CAB 1/2 TON, EXTENDED CAB 5'8" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 8' BOX 1/2 TON, REGULAR CAB 6'6" BOX 1/2 TON, REGULAR CAB 8' BOX 1/2 TON
    2009-2010 Chevrolet Suburban8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L1/2 TON
    2009-2010 Chevrolet Tahoe8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex4 DOOR 1/2 TON
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 20833675 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you install the 2008 Chevrolet Avalanche? Posted by Customer
    A:
    To install, reverse the removal steps and ensure the lower mounting bolt is pointing in the same direction as before.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done to prevent the 2012 Chevrolet Avalanche from rolling off the stands? Posted by Customer
    A:
    The front wheels should be blocked to prevent the vehicle from rolling off the stands.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What components should be visually inspected for damage and distortion for the 2009 Chevrolet Avalanche? Posted by Customer
    A:
    Visually inspect the steering and suspension components (front and rear) for damage and distortion. Look for damaged seals, boots, bushings, and any leaks.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How can you check for movement at the steering knuckle-to-control arm balljoint for the 2013 Chevrolet Silverado? Posted by Customer
    A:
    Have an assistant grasp the lower edge of the tire and move the wheel in and out while you look for movement at the steering knuckle-to-control arm balljoint. If there is any movement, the suspension balljoint(s) must be replaced.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How can the shock absorber be installed of the 2007 Chevrolet Silverado? Posted by Customer
    A:
    The shock absorber can be installed by reversing the removal steps and tightening the fasteners to the torque specifications.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    Which CV boot should be inspected more frequently, and why for the 2008 Chevrolet Tahoe? Posted by Customer
    A:
    The outer CV boot should be inspected more frequently because it wears out sooner due to constant pivoting following the steering action of the front hub.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done if there is evidence of cracks or leaking lubricant in the CV boots for the 2010 Chevrolet Suburban? Posted by Customer
    A:
    If there is any evidence of cracks or leaking lubricant in the CV boots, they must be replaced.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How can you check for play in the steering system components for the 2007 GMC Sierra? Posted by Customer
    A:
    Grasp each front tire at the front and rear edges, push in at the front, pull out at the rear, and feel for play in the steering system components. If any free play is noted, check the idler arm and the tie-rod ends for looseness.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How can the shock absorber be installed for the 2013 Chevrolet Suburban? Posted by Customer
    A:
    The shock absorber can be installed by reversing the removal steps and tightening the fasteners to the torque specifications.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you install the 2011 Chevrolet Tahoe? Posted by Customer
    A:
    To install, reverse the removal steps and ensure the lower mounting bolt is pointing in the same direction as before.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you install the torsion bar2011 Chevrolet Silverado? Posted by Customer
    A:
    To install, reverse the removal steps and ensure the lower mounting bolt is pointing in the same direction as before.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you remove the 2012 Chevrolet Suburban? Posted by Customer
    A:
    Start by loosening the front wheel lug nuts, raising the vehicle, and removing the wheel. Support the outer end of the lower control arm with a floor jack and detach the tie-rod end from the steering knuckle. Remove the upper mounting nuts and the two bolts that attach the lower end of the shock absorber to the lower control arm. Pull the shock out from below.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after supporting the rear axle for the 2010 Chevrolet Tahoe? Posted by Customer
    A:
    After supporting the rear axle, the shock absorber upper and lower mounting fasteners should be removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you remove the 2007 GMC Sierra? Posted by Customer
    A:
    Start by loosening the front wheel lug nuts, raising the vehicle, and removing the wheel. Support the outer end of the lower control arm with a floor jack and detach the tie-rod end from the steering knuckle. Remove the upper mounting nuts and the two bolts that attach the lower end of the shock absorber to the lower control arm. Pull the shock out from below.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you remove the 2013 GMC Yukon? Posted by Customer
    A:
    Start by loosening the front wheel lug nuts, raising the vehicle, and removing the wheel. Support the outer end of the lower control arm with a floor jack and detach the tie-rod end from the steering knuckle. Remove the upper mounting nuts and the two bolts that attach the lower end of the shock absorber to the lower control arm. Pull the shock out from below.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How can the shock absorber be installed for the 2013 GMC Yukon? Posted by Customer
    A:
    The shock absorber can be installed by reversing the removal steps and tightening the fasteners to the torque specifications.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the first step to remove the shock absorber from the 2011 GMC Sierra? Posted by Customer
    A:
    The first step is to raise the rear of the vehicle and support it securely on jackstands placed underneath the frame rails.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done if there is evidence of cracks or leaking lubricant in the CV boots for the 2013 GMC Yukon? Posted by Customer
    A:
    If there is any evidence of cracks or leaking lubricant in the CV boots, they must be replaced.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 20833675, the Right Choice

To ensure reliability, purchase GM part # 20833675 Front Shock Absorber Assembly. It is sometimes referred to as Chevrolet Shock Absorber. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Avalanche, Silverado, Tahoe models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 20833675 Front Shock Absorber Assembly. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly