Cadillac 25693381 Front Spring

You can Select Your Vehicle to check if 25693381 fits your vehicle.

Remove the wheel and mark the relationship of the strut to the steering knuckle. Remove the brake hose bracket and ABS wiring harness bracket from the strut. Remove the strut-to-knuckle nuts and knock the bolts out with a soft-face hammer. On 1999 models, disconnect the stabilizer bar link from the strut. Separate the strut from the steering knuckle, being careful not to overextend the inner CV joint or stretch the brake hose. If equipped, unplug the electrical connector from the strut. Have an assistant support the strut assembly and remove the three strut upper mounting nuts or bolts. Remove the assembly through the fender well.

It is crucial to exercise extreme caution when removing a coil spring to avoid any serious injuries.

One should adhere closely to the provided instructions and follow the guidelines provided by the manufacturer for the proper usage of the spring compressor to avoid any serious injuries.

Consider options like rebuilt or new strut assemblies that may be available on an exchange basis.

Remove the wheel and mark the relationship of the strut to the steering knuckle.

Have the front-end alignment checked and adjusted if needed.

For installation, make sure the insulator is in place on the control arm when installing the coil spring. Ensure that the pigtail at the upper end of the spring is pointing to the rear for the left coil spring and forward for the right coil spring. Tighten all suspension fasteners to the torque specifications and the wheel lug nuts as well.

To start removing the 1999 Deville model, first, loosen the rear wheel lug nuts and block the front wheels. Then, raise the rear of the vehicle and support it securely on jackstands placed under the frame. Remove the rear wheels.