Make sure this part fits

Cadillac 14071849 Seal,Transfer Case Shift Detent Plunger Plug(O Ring)

1999-2005 Cadillac Escalade

Customer Questions & Expert Answers (9)
GM 14071849 Seal,Transfer Case Shift Detent Plunger Plug(O Ring)
  • Part Description
    SEAL, Transfer Case
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Cadillac
    Manufacturer Part Number14071849
    Part DescriptionSEAL, Transfer Case
    Item Dimensions1.2 x 1.2 x 0.2 inches
    Item Weight0.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU14071849
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2002-2005, 1999-2000 Cadillac Escalade8 Cyl 5.3L, 8 Cyl 5.7L, 8 Cyl 6.0L1/2 TON, 3/4 TON, 4 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON, EXT 1/2 TON, EXT 3/4 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 3/4 TON, K2500 CREW CAB, REGULAR CAB 3/4 TON, YUKON/DENALI/ESCALADE
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 14071849 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What are the steps for reinstalling the U-joint flange and dust shield (if equipped) for the 1998 Chevrolet Blazer? Posted by Customer
    A:
    Reinstall the U-joint flange and nut (if equipped) and tighten the nut to the torque specifications. Reinstall the dust shield (if equipped) by carefully tapping it into place.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    How can you identify if the seal is leaking for the 2013 GMC Sierra? Posted by Customer
    A:
    If the seal is leaking, transmission lubricant will be built up on the front of the driveshaft and may be dripping from the rear of the transmission.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    What must be done to remove an extension housing oil seal that is causing oil leaks for the 2013 Chevrolet Silverado? Posted by Customer
    A:
    The vehicle must be raised and supported securely on jackstands.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    How can you remove the oil seal and bushing from the transmission during repair of the 2001 GMC Jimmy? Posted by Customer
    A:
    To remove the oil seal and bushing, remove the driveshaft and carefully tap the dust shield (if equipped) to the rear and remove it from the transmission.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    What should be done after raising for the 2007 GMC Sierra? Posted by Customer
    A:
    After raising the vehicle, the skid plate should be removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    How can you install the new oil seal and bushing during the repair for the 2000 Chevrolet S10? Posted by Customer
    A:
    To install the new oil seal and bushing, use a large section of pipe or a very large deep socket as a drift and drive it into the bore squarely, making sure it's completely seated. Install a new bushing using the same method.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    What needs to be removed depending on which seal you're replacing for the 2012 Chevrolet Silverado? Posted by Customer
    A:
    Depending on which seal you're replacing, either the front or rear driveshaft needs to be removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    How should the splines of the transmission output shaft and the driveshaft sleeve yoke be prepared before installing the driveshaft for the 1995 GMC Sonoma? Posted by Customer
    A:
    Lubricate the splines of the transmission output shaft and the outside of the driveshaft sleeve yoke with lightweight grease before installing the driveshaft, being careful not to damage the lip of the new seal.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 14071849, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 14071849 Seal,Transfer Case Shift Detent Plunger Plug(O Ring). It is sometimes referred to as Cadillac Transfer Case Seal. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Cadillac Escalade models.

Affordable, reliable and built to last, GM part # 14071849 Seal,Transfer Case Shift Detent Plunger Plug(O Ring) stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Cadillac parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly