Make sure this part fits

Cadillac 12555840 Plenum, Intake Manifold

2000-2005 Cadillac

Customer Questions & Expert Answers (2)
GM 12555840 Plenum, Intake Manifold
  • Part Description
    PLENUM, Engine Fuel Intake Manifold
  • Manufacturer
    General Motors
Make sure this part fits
$31.97 MSRP: $52.91
You Save: $20.94 (40%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Cadillac
    Manufacturer Part Number12555840
    Part DescriptionPLENUM, Engine Fuel Intake Manifold
    Other NamesIntake Plenum
    Item Dimensions8.7 x 6.1 x 1.8 inches
    Item Weight1.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU12555840
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2000-2005 Cadillac Deville8 Cyl 4.6LDEVILLE, FUNERAL COACH, HIGH LUXURY, LIMOUSINE, SEVILLE, SLS, STS, TOURING 4 DOOR, TOURING SEDAN
    2000-2002 Cadillac Eldorado8 Cyl 4.6LELDORADO
    2000-2004 Cadillac Seville8 Cyl 4.6LDEVILLE, HIGH LUXURY, SEVILLE, SLS, STS, TOURING 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 12555840 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove and install the intake manifold in 4.6L V8 engine on Cadillac DeVille? Posted by Customer
    A:
    To have access to the intake manifold, one must unlatch the cable from the negator of the battery then unbolt the intake manifold service cover. Remove the accelerator pedal and its cable, cruise control piston and its cable and throttle body actuator, remove the fuel screw cap and disconnect the fuel inlet and return hoses at the intake manifold. Take off the air intake duct from the throttle body, air filter housing, throttle body (for the models of 1999), and fuel injectors. As for 1999 models, the remover of the throttle body and spacer makes a way to the fuel rail possible. After that, pull out the transaxle vent hose and the transaxle shift cable at the bracket, then take off the throttle position sensor and IAC valve connectors, and pull a little coolant into a container. For 1999 models, if the engine compartment brace is in place on the strut towers, it must be removed as must the EGR pipe from the intake manifold with PCV hose disconnected and the ignition wires from the coil packs must be labeled before removal. On 2000 and models remove the coil module connectors from the coils/module assemblies and remove the vacuum tubes from the AIR solenoid. Some of which include; loosen the intake manifold duct clamp, remove all the wires, hoses and brackets connected to the intake manifold and label them as you remove them, and finally unscrew the mounting nuts and bolts that hold the intake manifold onto the cylinder heads. When the manifold is stuck, do not apply force trying to pry between the gasket mating surfaces as this may actually cause further damage; it is recommended that one apply several passes to have an even separation. For installation, examine intake manifold gaskets; intake manifold gaskets are reusable provided they are in good shape but for any 2000 and the models that followed, the gaskets must be replaced. Scrape every hint of the old gasket material from the intake manifold and cylinder heads; clean the mating surfaces; and replace them with new gaskets. Place the intake manifold to the engine block and adjust the position of the studs and bolts holes correctly. Screw the nuts and bolts beginning with the inner bolts then go outwards, several passes are made to ensure that the mating is done equally. Make sure that all the nuts and bolts are royally and tightly fastened with the recommended torque and this must be in a circular pattern in the inner ring, outer ring, and around to ensure that there is no warping. For the year 2000 and up, tighten the duct clamp securely and then install the other components inversely of removing them. Last but not the least, add the coolant and correct levels, replace the engine oil and filter, operate the engine and look for any signs of fuel, vacuum and coolant leaks.
    Posted by GMPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 12555840, the Right Choice

To ensure reliability, purchase GM part # 12555840 Plenum, Intake Manifold. It is sometimes referred to as Cadillac Intake Manifold. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Cadillac Deville, Eldorado, Seville models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 12555840 Plenum, Intake Manifold. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Cadillac parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly