Cadillac 19332541 PAD KIT,RR DISC BRK

You can Select Your Vehicle to check if 19332541 fits your vehicle.

To replace the brake pads on a vehicle, start by removing the covers from the brake fluid reservoir. Then, loosen the wheel lug nuts and raise the front or rear of the vehicle, supporting it securely on jackstands. Remove the wheels and work on one brake assembly at a time, using the assembled brake for reference if needed. Inspect the rotor carefully and remove it if machining is necessary, along with the pads from the calipers. Clean the brake with brake system cleaner and push the piston(s) back into its/their bore(s) using a C-clamp or flat bar. Be cautious of the fluid in the master cylinder rising and siphon off some if necessary. For installation, ensure to stay in order when replacing the disc brake pads on 2003 and later models. Tighten the caliper mounting bolts and wheel lug nuts to the proper torque specifications. Finally, depress the brake pedal a few times to bring the pads into contact with the disc and check the brake fluid level, adding more if needed.

Apply and release the brake pedal, check the fluid level, and test the brakes to ensure they are working properly.

For rear pad removal, wash the brake assembly, remove the parking brake cable, and remove the lower caliper mounting bolt. Pivot the caliper up and remove the pads and retainers.

After raising the vehicle and securing it on jackstands, remove the wheels and work on one brake assembly at a time.