Make sure this part fits

Cadillac 7470511 Front Axle, Hub Wheel Bearing

1992-1996 Cadillac

Customer Questions & Expert Answers (5)
GM 7470511 Front Axle, Hub Wheel Bearing
  • Part Description
    Hub,Front Wheel
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$199.02 MSRP: $361.87
You Save: $162.85 (45%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Cadillac
    Manufacturer Part Number7470511
    Part DescriptionHub,Front Wheel
    Item Dimensions7.1 x 7.1 x 6.2 inches
    Item Weight8.80 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU7470511
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1993 Cadillac Allante8 Cyl 4.6LALLANTE
    1992-1996 Cadillac Deville8 Cyl 4.6L, 8 Cyl 4.9L2 DOOR, 4 DOOR, 60 SPECIAL 4 DOOR, CONVERSION, TOURING 4 DOOR
    1992-1996 Cadillac Eldorado8 Cyl 4.6L, 8 Cyl 4.9LCOMMERCIAL CHASSIS, ELDORADO
    1992-1993 Cadillac Fleetwood8 Cyl 4.9L, 8 Cyl 5.7L2 DOOR, 4 DOOR, 60 SPECIAL 4 DOOR, CONVERSION, TOURING 4 DOOR
    1992-1996 Cadillac Seville8 Cyl 4.6L, 8 Cyl 4.9L4 DOOR, SEVILLE
  • Customer Questions & Expert Answers

    Q:
    Will this part number fit my car? Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 7470511 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove and replace the front hub and bearing assembly on a Cadillac ElDorado and Fleetwood? Posted by Customer
    A:
    Raise and safely support the vehicle, allowing the front suspension to hang free. Remove the wheel and tire assembly. Clean the halfshaft threads of all dirt and lubricant. Insert a drift punch through the caliper and into the rotor to keep the rotor from turning. Then remove the hub nut and washer, if equipped. Remove the caliper without disconnecting the brake hose. Suspend the caliper from the coil spring with wire; do not let it hang by the brake hose. Remove the disc brake rotor. If equipped, detach the anti-lock brake wheel speed sensor connector. Remove the hub and bearing assembly retaining bolts and the dust shield. Use tool J-28733-A or equivalent to separate the hub and bearing assembly from the halfshaft. Apply a light coating of grease to the knuckle bore. Install the new hub and bearing assembly. Draw the hub and bearing assembly onto the halfshaft with a new hub nut. Install the dust shield and the hub and bearing assembly retaining bolts. Tighten to 70 ft. lbs. (95 Nm). If equipped, attach the anti-lock brake wheel speed sensor connector. Install the disc brake rotor and caliper. Insert a drift punch into the caliper and rotor to prevent the rotor from turning. On 1990-91 vehicles, tighten the hub nut to 185 ft. lbs. (251 Nm). On 1992-98 vehicles, tighten the hub nut to 110 ft. lbs. (145 Nm), except on Deville and Fleetwood equipped with J55 brake, in which case the torque is 130 ft. lbs. (177 Nm). Install the wheel and tire assembly and lower the vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How should the hub and bearing assembly be removed on the 1993 Cadillac Fleetwood? Posted by Customer
    A:
    Remove the brake drum, the retaining bolts, and the hub and bearing assembly from the axle. If equipped with anti-lock brakes, be careful working around the sensor wires; disconnect them as needed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    How can you check the front wheel bearings for the 1987 Oldsmobile Cutlass? Posted by Customer
    A:
    With the vehicle securely supported on jack stands, spin the wheel and check for noise, rolling resistance, or free play. Also, grab the top and bottom of the tire and move it in and out on the spindle. If it moves more than 0.005in, the bearings should be checked.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done after removing the bearing of the 1987 Oldsmobile Cutlass? Posted by Customer
    A:
    The bearing recess should be cleaned out.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 7470511, the Right Choice

To ensure reliability, purchase GM part # 7470511 Front Axle, Hub Wheel Bearing. It is sometimes referred to as Cadillac Wheel Bearing, Cadillac Wheel Hub. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Cadillac Allante, Deville, Fleetwood models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 7470511 Front Axle, Hub Wheel Bearing. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Cadillac parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly