Make sure this part fits

Cadillac 25512348 Flywheel & Ring Gear Assembly

1982 Cadillac

Customer Questions & Expert Answers (16)
GM 25512348 Flywheel & Ring Gear Assembly
  • Part Description
    Gear Assembly, Flywheel & Ring Gear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Cadillac
    Manufacturer Part Number25512348
    Part DescriptionGear Assembly, Flywheel & Ring Gear
    Other NamesDrive Plate
    Item Dimensions16.6 x 17.1 x 1.8 inches
    Item Weight3.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU25512348
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1982 Cadillac Deville6 Cyl 4.1L2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR
    1982 Cadillac Eldorado6 Cyl 4.1LELDORADO
    1982 Cadillac Fleetwood6 Cyl 4.1L2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR
    1982 Cadillac Seville6 Cyl 4.1LSEVILLE
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 25512348 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What should you do if the flywheel run-out exceeds the limit in an automatic transmission for the 1985 Buick Regal? Posted by Customer
    A:
    Remove the flywheel and check for burrs between it and the crankshaft mounting flange.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What should be checked before reinstalling the flywheel for the 1978 Chevrolet Caprice? Posted by Customer
    A:
    When putting the flywheel back, check that the crankshaft flange is free of burrs to prevent run-out and vibration.
    Posted by GMPartsGiant Specialist
    Q:
    What type of engines does this procedure apply to for the 1985 Chevrolet Caprice? Posted by Customer
    A:
    This procedure applies only to 231 cu in V6 engines.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done after removing the transmission for the 1985 Chevrolet Caprice? Posted by Customer
    A:
    Take out the six bolts that secure the flywheel to the crankshaft flange, noting that the bolt holes are unevenly spaced to ensure correct installation of the flex plate.
    Posted by GMPartsGiant Specialist
    Q:
    What should be examined on the starter ring gear for the 1985 Chevrolet Caprice? Posted by Customer
    A:
    Examine the starter ring gear for broken or chipped teeth. If any are evident, the flywheel must be replaced with a new one.
    Posted by GMPartsGiant Specialist
    Q:
    How should the flywheel be aligned during installation for manual transmissions for the 1986 Chevrolet Caprice? Posted by Customer
    A:
    For manual transmissions, align the dowel hole in the crankshaft with the dowel hole in the flywheel during installation.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What is important to do before installing the flywheel for the 1979 Chevrolet El Camino? Posted by Customer
    A:
    Prior to installing the flywheel, it is important to clean the mating surfaces of both the flywheel and the crankshaft.
    Posted by GMPartsGiant Specialist
    Q:
    What should be checked on the crankshaft flange and flex plate for the 1984 Chevrolet El Camino? Posted by Customer
    A:
    Check for any burrs or nicks, which should be removed with a mill file.
    Posted by GMPartsGiant Specialist
    Q:
    What should be checked before reinstalling the flywheel for the 1982 Chevrolet El Camino? Posted by Customer
    A:
    Ensure the crankshaft flange is free of burrs to prevent run-out and vibration.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What should be done if the flex plate is found to be out of balance for the 1982 Chevrolet El Camino? Posted by Customer
    A:
    If the flex plate is found to be out of balance, raise the car and remove the lower flex plate cover, marking the flex plate at four locations 90 degrees apart.
    Posted by GMPartsGiant Specialist
    Q:
    What should be checked on the clutch friction face for manual transmission versions for the 1986 Chevrolet El Camino? Posted by Customer
    A:
    Check for scoring on the clutch friction face. Light scoring may be dressed out using emery cloth, but deep scoring necessitates replacing the flywheel to prevent clutch damage.
    Posted by GMPartsGiant Specialist
    Q:
    How should the flex plate be installed for the 1991 Oldsmobile Cutlass? Posted by Customer
    A:
    Install the flex plate and torque the bolts to the proper specifications.
    Posted by GMPartsGiant Specialist
    Q:
    What should be checked on the clutch friction face for manual transmission versions for the 1985 Oldsmobile Cutlass? Posted by Customer
    A:
    Check for scoring on the clutch friction face. Light scoring may be dressed out using emery cloth, but deep scoring necessitates replacing the flywheel to prevent clutch damage.
    Posted by GMPartsGiant Specialist
    Q:
    How should the flywheel be aligned during installation for manual transmissions for the 1990 Oldsmobile Cutlass? Posted by Customer
    A:
    For manual transmissions, align the dowel hole in the crankshaft with the dowel hole in the flywheel during installation.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What is the first step in the process for the 1985 Oldsmobile Cutlass? Posted by Customer
    A:
    Remove the transmission and clutch.
    Posted by GMPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 25512348, the Right Choice

To ensure reliability, purchase GM part # 25512348 Flywheel & Ring Gear Assembly. It is sometimes referred to as Cadillac Flywheel. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Cadillac Deville, Fleetwood, Seville models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 25512348 Flywheel & Ring Gear Assembly. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Cadillac parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly