Make sure this part fits

Cadillac 15267620 Rear Upper Suspension Control Arm Assembly

2004-2015 Cadillac

Customer Questions & Expert Answers (3)
GM 15267620 Rear Upper Suspension Control Arm Assembly
  • Part Description
    Arm Assembly, Rear Suspension Upper Control ; Arm, Rear Axle Control Arm
  • Position
    Rear Upper
  • Replaces
    25766118
  • Manufacturer
    General Motors
Make sure this part fits
$124.17 MSRP: $198.03
You Save: $73.86 (38%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Cadillac
    Manufacturer Part Number15267620
    Part DescriptionArm Assembly, Rear Suspension Upper Control ; Arm, Rear Axle Control Arm
    Other NamesUpper Control Arm
    Item Dimensions4.5 x 16.9 x 16.8 inches
    Item Weight8.90 Pounds
    PositionRear Upper
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces25766118
    ManufacturerGeneral Motors
    SKU15267620
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008-2015 Cadillac CTS6 Cyl 3.0L, 6 Cyl 3.6L, 8 Cyl 6.2L2 DOOR COUPE, 4 DOOR, 4 DOOR (RHD), 4 DOOR RHD, 4 DOOR SEDAN, 4 DOOR SEDAN(RHD), 4 DOOR STATION WAGON, 4 DOOR STATION WAGON(RHD), 4 DOOR WAGON, 4 DOOR WAGON(RHD), V 2 DOOR COUPE, V 4 DOOR, V 4 DOOR SEDAN, V 4 DOOR WAGON
    2004-2009 Cadillac SRX6 Cyl 3.6L, 8 Cyl 4.6L4 DOOR, 4 DOOR(RHD), SRX, V8 4 DOOR
    2005-2011 Cadillac STS6 Cyl 3.6L, 8 Cyl 4.4L, 8 Cyl 4.6L4 DOOR, 4 DOOR(RHD), V 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 15267620 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove and install the lower and upper control arms on Cadillac CTS? Posted by Customer
    A:
    Before you can take off the lower arm, however, you need to put the car on a jack, and with the wheel off and splash shield removed, loosen the wheel lug nuts. For models from 2008 and later, remove the front wheel speed sensor 13 . Remove the nut from the stabilizer bar link which is on the control arm and also remove the nut joining the lower end of the shock absorber to control arm. Remove the outer tie-rod ends, and then loosen the bolts fastening the steering gear; lift the steering gear up a little to allow the bolts to be removed. Remove the lower ball joint nut and then using ball joint separator, pry out the ball stud from the knuckle and use Allen key to hold this ball from turning further with the nut. Take out the arm to subframe mounting bolts and then take out the lower control arm. For the upper arm, it connects to the top of the steering knuckle with a ball joint and to two places at the shock absorber top mount with bolts that can pivot. Disassemble the shock absorber and then you will have to undo the nuts and bolts of the upper arm mounting. Examine the condition of the control arm and the wear of the bushings and with the need of a new hardware do not straighten a bent control arm. Installation is performed vice versa how removal is done, to make sure that all nuts and bolts are tightened to the stated torque, before tightening the pivot nuts/bolts, lift the outer end of the lower arm approximately to normal height. Lastly, the wheel and lug nuts should be fitted on the wheel and then the vehicle should be lowered, further to that the lug nuts should be tightened to the appropriate torque and if possible after completing all the job it is recommended that one should take the car for a front wheel alignment check up.
    Posted by GMPartsGiant Specialist
    Q:
    What is the process for separating the balljoint from the knuckle for the 2014 Cadillac CTS? Posted by Customer
    A:
    Remove the upper balljoint nut and use a balljoint removal tool to separate the ballstud from the knuckle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Trailing Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 15267620, the Right Choice

To ensure reliability, purchase GM part # 15267620 Rear Upper Suspension Control Arm Assembly. It is sometimes referred to as Cadillac Control Arm, Cadillac Trailing Arm. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Cadillac CTS, SRX, STS models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 15267620 Rear Upper Suspension Control Arm Assembly. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Cadillac parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly