Make sure this part fits

Cadillac 25980104 Front Shock Absorber Assembly

2007-2010 Cadillac Escalade

Customer Questions & Expert Answers (19)
GM 25980104 Front Shock Absorber Assembly
  • Part Description
    Absorber Assembly, Front Shock ; Absorber, Front And Rear Suspension
  • Position
    Front
  • Replaces
    25876876
  • Manufacturer
    General Motors
Make sure this part fits
$107.50 MSRP: $192.82
You Save: $85.32 (45%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Cadillac
    Manufacturer Part Number25980104
    Part DescriptionAbsorber Assembly, Front Shock ; Absorber, Front And Rear Suspension
    Item Dimensions6.1 x 6.1 x 26.5 inches
    Item Weight8.20 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces25876876
    ManufacturerGeneral Motors
    SKU25980104
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2010 Cadillac Escalade8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex1/2 TON, EXT 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 25980104 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What are the initial steps for inspecting 2011 Chevrolet Avalanche suspension and shocks? Posted by Customer
    A:
    Start by parking the vehicle on level ground, turning off the engine, and setting the parking brake. Check the tire pressures. Push down at one corner of the vehicle and then release it while noting the movement of the body. It should stop moving and come to rest in a level position within one or two bounces.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after supporting the rear axle for the 2012 Chevrolet Avalanche? Posted by Customer
    A:
    After supporting the rear axle, the shock absorber upper and lower mounting fasteners should be removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you remove the 2010 Chevrolet Avalanche? Posted by Customer
    A:
    Start by loosening the front wheel lug nuts, raising the vehicle, and removing the wheel. Support the outer end of the lower control arm with a floor jack and detach the tie-rod end from the steering knuckle. Remove the upper mounting nuts and the two bolts that attach the lower end of the shock absorber to the lower control arm. Pull the shock out from below.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you install the 2011 Chevrolet Suburban? Posted by Customer
    A:
    To install, reverse the removal steps and ensure the lower mounting bolt is pointing in the same direction as before.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should you check the shock absorbers for evidence of fluid leakage for the 2013 Chevrolet Tahoe? Posted by Customer
    A:
    Raise the vehicle and support it securely on jackstands. Inspect the shock absorbers for evidence of fluid leakage. A light film of fluid is generally not a concern. Ensure that any fluid noted is from the shocks and not from another source.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the first step to remove the shock absorber from the 2013 GMC Sierra? Posted by Customer
    A:
    The first step is to raise the rear of the vehicle and support it securely on jackstands placed underneath the frame rails.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should the rear axle be supported during the removal process of the 2010 Chevrolet Silverado? Posted by Customer
    A:
    The rear axle should be supported with a floor jack placed under the axle tube closest to the shock absorber being removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should the rear axle be supported during the removal process for the 2011 Chevrolet Suburban? Posted by Customer
    A:
    The rear axle should be supported with a floor jack placed under the axle tube closest to the shock absorber being removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done to prevent the 2012 Chevrolet Tahoe from rolling off the stands? Posted by Customer
    A:
    The front wheels should be blocked to prevent the vehicle from rolling off the stands.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you remove the coil-over shock absorber2010 Chevrolet Silverado? Posted by Customer
    A:
    Start by loosening the front wheel lug nuts, raising the vehicle, and removing the wheel.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you remove the 2011 Chevrolet Tahoe? Posted by Customer
    A:
    Start by loosening the front wheel lug nuts, raising the vehicle, and removing the wheel. Support the outer end of the lower control arm with a floor jack and detach the tie-rod end from the steering knuckle. Remove the upper mounting nuts and the two bolts that attach the lower end of the shock absorber to the lower control arm. Pull the shock out from below.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done if there is evidence of cracks or leaking lubricant in the CV boots for the 2013 Chevrolet Suburban? Posted by Customer
    A:
    If there is any evidence of cracks or leaking lubricant in the CV boots, they must be replaced.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    Why are driveaxle boots important, and what should you inspect them for for the 2011 Chevrolet Silverado? Posted by Customer
    A:
    Driveaxle boots are important because they prevent dirt, water, and foreign material from entering and damaging the constant velocity (CV) joints. Inspect the boots for tears, cracks, as well as loose clamps.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What specific areas should be examined when inspecting the control arms for the 2011 GMC Sierra? Posted by Customer
    A:
    Examine the bushings where the control arms meet the chassis for damage and wear.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you install the 2010 GMC Sierra? Posted by Customer
    A:
    To install, reverse the removal steps and ensure the lower mounting bolt is pointing in the same direction as before.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What specific areas should be examined when inspecting the control arms for the 2010 GMC Yukon? Posted by Customer
    A:
    Examine the bushings where the control arms meet the chassis for damage and wear.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you install the 2011 GMC Yukon? Posted by Customer
    A:
    To install, reverse the removal steps and tighten the mounting fasteners to the torque specifications. If equipped with a suspension control system, reconnect the electrical connector to the top of the shock absorber.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should the rear axle be supported during the removal process for the 2012 GMC Yukon? Posted by Customer
    A:
    The rear axle should be supported with a floor jack placed under the axle tube closest to the shock absorber being removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 25980104, the Right Choice

To ensure reliability, purchase GM part # 25980104 Front Shock Absorber Assembly. It is sometimes referred to as Cadillac Shock Absorber. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Cadillac Escalade models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 25980104 Front Shock Absorber Assembly. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Cadillac parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly