Make sure this part fits

Cadillac 19420489 ABSORBER ASM,FRT SHK

2007-2008 Cadillac Escalade

Customer Questions & Expert Answers (19)
GM 19420489 ABSORBER ASM,FRT SHK
  • Part Description
    ABSORBER ASM,FRT SHK
  • Replaces
    19368453, 19353945, 25845438, 25845446, 25888675, 15909491, 15939374, 15886465, 25888684, 25888683, 25845447, 15918522, 19209555, 19300031
  • Manufacturer
    General Motors
Make sure this part fits
$326.17 MSRP: $647.16
You Save: $320.99 (50%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Cadillac
    Manufacturer Part Number19420489
    Part DescriptionABSORBER ASM,FRT SHK
    Other NamesShock, Shock Absorber
    Item Dimensions25.0 x 6.3 x 6.3 inches
    Item Weight7.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces19368453, 19353945, 25845438, 25845446, 25888675, 15909491, 15939374, 15886465, 25888684, 25888683, 25845447, 15918522, 19209555, 19300031
    ManufacturerGeneral Motors
    SKU19420489
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2008 Cadillac Escalade8 Cyl 6.2L1/2 TON, EXT 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 19420489 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the 2011 Chevrolet Avalanche? Posted by Customer
    A:
    Start by loosening the front wheel lug nuts, raising the vehicle, and removing the wheel. Support the outer end of the lower control arm with a floor jack and detach the tie-rod end from the steering knuckle. Remove the upper mounting nuts and the two bolts that attach the lower end of the shock absorber to the lower control arm. Pull the shock out from below.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done if the 2010 Chevrolet Avalanche is equipped with a ride control system? Posted by Customer
    A:
    If the vehicle is equipped with a ride control system, the electrical connector and the airline should be disconnected from the shock absorber.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done if fluid leakage is observed for the 2009 Chevrolet Avalanche? Posted by Customer
    A:
    If leakage is noted, it's advisable to replace the shocks as a set.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you remove the 2007 GMC Sierra? Posted by Customer
    A:
    Follow the same steps as removing the coil-over shock absorber model, but use a backup wrench on the stem to remove the upper mounting nut and related hardware. Remove the lower mounting nut and bolt, noting the direction in which the bolt points.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What are the initial steps for inspecting 2012 Chevrolet Tahoe suspension and shocks? Posted by Customer
    A:
    Start by parking the vehicle on level ground, turning off the engine, and setting the parking brake. Check the tire pressures. Push down at one corner of the vehicle and then release it while noting the movement of the body. It should stop moving and come to rest in a level position within one or two bounces.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you install the 2008 Chevrolet Suburban? Posted by Customer
    A:
    To install, reverse the removal steps and tighten the mounting fasteners to the torque specifications. If equipped with a suspension control system, reconnect the electrical connector to the top of the shock absorber.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after supporting the rear axle for the 2013 GMC Sierra? Posted by Customer
    A:
    After supporting the rear axle, the shock absorber upper and lower mounting fasteners should be removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done if fluid leakage is observed for the 2012 Chevrolet Suburban? Posted by Customer
    A:
    If leakage is noted, it's advisable to replace the shocks as a set.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should the rear axle be supported during the removal process for the 2011 Chevrolet Suburban? Posted by Customer
    A:
    The rear axle should be supported with a floor jack placed under the axle tube closest to the shock absorber being removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after supporting the rear axle of the 2007 Chevrolet Silverado? Posted by Customer
    A:
    After supporting the rear axle, the shock absorber upper and lower mounting fasteners should be removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you remove the coil-over shock absorber2007 Chevrolet Silverado? Posted by Customer
    A:
    Start by loosening the front wheel lug nuts, raising the vehicle, and removing the wheel.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How can you check for play in the steering system components for the 2011 Chevrolet Silverado? Posted by Customer
    A:
    Grasp each front tire at the front and rear edges, push in at the front, pull out at the rear, and feel for play in the steering system components. If any free play is noted, check the idler arm and the tie-rod ends for looseness.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you remove the 2010 GMC Yukon? Posted by Customer
    A:
    Start by loosening the front wheel lug nuts, raising the vehicle, and removing the wheel. Support the outer end of the lower control arm with a floor jack and detach the tie-rod end from the steering knuckle. Remove the upper mounting nuts and the two bolts that attach the lower end of the shock absorber to the lower control arm. Pull the shock out from below.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after supporting the rear axle for the 2011 Chevrolet Tahoe? Posted by Customer
    A:
    After supporting the rear axle, the shock absorber upper and lower mounting fasteners should be removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    Which CV boot should be inspected more frequently, and why for the 2011 GMC Sierra? Posted by Customer
    A:
    The outer CV boot should be inspected more frequently because it wears out sooner due to constant pivoting following the steering action of the front hub.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How can the shock absorber be installed for the 2010 GMC Yukon? Posted by Customer
    A:
    The shock absorber can be installed by reversing the removal steps and tightening the fasteners to the torque specifications.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How can you check for movement at the steering knuckle-to-control arm balljoint for the 2009 GMC Yukon? Posted by Customer
    A:
    Have an assistant grasp the lower edge of the tire and move the wheel in and out while you look for movement at the steering knuckle-to-control arm balljoint. If there is any movement, the suspension balljoint(s) must be replaced.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you remove the 2009 GMC Yukon? Posted by Customer
    A:
    Follow the same steps as removing the coil-over shock absorber model, but use a backup wrench on the stem to remove the upper mounting nut and related hardware. Remove the lower mounting nut and bolt, noting the direction in which the bolt points.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 19420489, the Right Choice

To ensure reliability, purchase GM part # 19420489 ABSORBER ASM,FRT SHK. It is sometimes referred to as Cadillac Shock Absorber. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Cadillac Escalade models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 19420489 ABSORBER ASM,FRT SHK. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Cadillac parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly