Buick 10465029 Starter Motor,Remanufactured, 5Mt

You can Select Your Vehicle to check if 10465029 fits your vehicle.

For an overhaul, start by removing the starter from the vehicle and disconnecting the field coil straps from the solenoid. Remove the through-bolts to separate the commutator end frame, field frame assembly, drive housing, and armature assembly. On diesel starters, remove the insulator from the end frame and the shift lever pivot bolt. On 25 MT diesel starters, remove the center bearing screws and the drive gear housing from the armature shaft. Slide off the 2-piece thrust collar from the armature shaft and use a piece of pipe or socket to drive the retainer toward the snapring. Remove the snapring with pliers and slide off the retainer and starter drive. To reinstall, lubricate the armature shaft and install the starter drive and retainer. Place the snapring on the shaft and tap it into place. Slide the retainer and thrust collar onto the shaft and squeeze them together with pliers. Lubricate the drive housing bushing and engage the shift lever yoke with the clutch. Install the drive assembly into the drive gear housing and reassemble the remaining components.