Make sure this part fits

Buick 10243923 Shaft, Rear Stabilizer

1997-2009 Buick

Customer Questions & Expert Answers (6)
GM 10243923 Shaft, Rear Stabilizer
  • Part Description
    SHAFT, Stabilizer
  • Position
    Rear
  • Replaces
    10277070
  • Manufacturer
    General Motors
Make sure this part fits
$93.26 MSRP: $146.75
You Save: $53.49 (37%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Buick
    Manufacturer Part Number10243923
    Part DescriptionSHAFT, Stabilizer
    Other NamesStabilizer Bar
    Item Dimensions5.9 x 50.4 x 13.9 inches
    Item Weight6.80 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10277070
    ManufacturerGeneral Motors
    SKU10243923
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2009 Buick Allure6 Cyl 3.6L, 6 Cyl 3.8L, 8 Cyl 5.3LCX (US)/ALLURE CX (CAN), CX 4 DOOR, CXL 4 DOOR, CXL(US)/ALLURE CXL(CAN), CXS 4 DOOR, CXS(US)/Allure CXS(CAN), SUPER SERIES 4 DOOR
    1997-2005 Buick Century6 Cyl 3.1LCUSTOM, CUSTOM 4 DOOR, GL, GLX, GS, LIMITED, LS, REGAL
    2005-2009 Buick LaCrosse6 Cyl 3.6L, 6 Cyl 3.8L, 8 Cyl 5.3LCX (US)/ALLURE CX (CAN), CX 4 DOOR, CXL 4 DOOR, CXL(US)/ALLURE CXL(CAN), CXS 4 DOOR, CXS(US)/Allure CXS(CAN), SUPER SERIES 4 DOOR
    1997-2004 Buick Regal6 Cyl 3.8LCUSTOM, GL, GLX, GS, LIMITED, LS, REGAL
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 10243923 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove and replace the rear stabilizer bar,stabilizer bar bushing and stabilizer bar link on Chevrolet Impala and Monte Carlo? Posted by Customer
    A:
    To remove and replace the rear sway bar bushing kit on a vehicle, start by loosening the rear wheel lug nuts and blocking the front wheels to prevent rolling. Then, raise the rear of the vehicle and support it securely on jackstands before removing the rear wheels. Next, detach the sway bar link from the sway bar bushing kit, and if necessary, remove the rear struts to remove one or both links entirely.
    Posted by GMPartsGiant Specialist
    Q:
    How do you install the rear stabilizer bar on2007 Buick LaCrosses with RPO GNE rear suspension? Posted by Customer
    A:
    The installation process involves lubricating the bushings, replacing suspension fasteners, and tightening them to the specified torque. Finally, tighten the wheel lug nuts to the torque specifications.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the installation process for the stabilizer bar link on the 2013 Buick LaCrosse? Posted by Customer
    A:
    Installation is simply the reverse of the removal process, and the nuts are tightened to the torque specifications.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    How do you start removing the stabilizer bar of the 2007 Chevrolet Impala? Posted by Customer
    A:
    To remove the stabilizer bar, start by loosening the front wheel lug nuts and raising the front of the vehicle. Support it securely on jackstands and remove the front wheels.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What should be done while raising the subframe for the 2007 Chevrolet Monte Carlo? Posted by Customer
    A:
    Slowly and carefully raise the subframe with the floor jack while guiding the steering gear input shaft into the shaft coupler. Install the pinch-bolt and tighten it to the proper torque specifications.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 10243923, the Right Choice

To ensure reliability, purchase GM part # 10243923 Shaft, Rear Stabilizer. It is sometimes referred to as Buick Sway Bar Kit. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Allure, Century, Regal models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 10243923 Shaft, Rear Stabilizer. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Buick parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly