Buick 92230620 Seal Assembly, Rear Axle Shaft

You can Select Your Vehicle to check if 92230620 fits your vehicle.

To remove the wheel seal, start by raising the rear of the vehicle and supporting it securely on jackstands. Place the transmission in Neutral with the parking brake off and block the front wheels to prevent the vehicle from rolling. Next, remove the driveaxle(s) and carefully pry out the wheel seal using a seal removal tool or a large screwdriver, being careful not to damage or scratch the seal bore. To install the new seal, use a seal installer or a large deep socket as a drift and drive it into the bore squarely, ensuring it is completely seated. Lubricate the lip of the new seal with multi-purpose grease and then install the rear driveaxle(s), being careful not to damage the lip of the new seal. Finally, check the differential lubricant level and add some, if necessary, to bring it to the appropriate level.