Buick 22867699 Rear Driver Side Power Window Regulator And Motor Assembly (Lh)

You can Select Your Vehicle to check if 22867699 fits your vehicle.

To remove the window regulator assembly, start by removing the door trim panel and water shield. Then, remove the energy absorber and lower the window glass until the glass clamp fasteners are accessible through the access holes. Loosen the glass clamp fasteners without removing them and secure the window with tape. Disconnect the regulator motor electrical connector and remove the regulator fastener hole cover. Finally, remove the regulator assembly mounting fasteners and take out the window regulator assembly from the door. To install, simply reverse the removal steps and remember to lubricate the rollers and wear points on the regulator with white grease before installation.

The first step is to remove the door trim panel and water shield.