Buick 13312102 Mount Assembly, Trans

You can Select Your Vehicle to check if 13312102 fits your vehicle.

Raise the vehicle and support it securely on jackstands, then place a floor jack under the transaxle with a block of wood between the jack and transaxle to prevent damage. For 2015 and earlier models, remove the battery and battery tray, followed by the front transaxle mount through-bolt, then the driver's side mount bracket-to-transaxle bolts. Lower the transaxle slightly to access and remove the mount-to-chassis bolts, then remove the driver's side mount and bracket, with installation being the reverse of removal and all bolts tightened to the specified torque. For 2016 and later models, remove the transaxle mount bracket-to-transaxle and transaxle mount-to-chassis bolts, then the driver's side mount-to-engine and mount-to-chassis bolts, followed by the transaxle mount and bracket, with installation being the reverse of removal and all bolts tightened to the specified torque. For the front, applicable to 2015 and earlier models, remove the mount-to-subframe thru bolt, then the mount-to-transaxle bolts and remove the mount, with installation being the reverse of removal and all bolts tightened to the specified torque. For the rear, on 2015 and earlier models, lower the exhaust to gain access, remove the mount-to-bracket thru bolt, then the mount-to-subframe bolts and remove the mount, with installation being the reverse of removal and all bolts tightened to the specified torque. For 2016 and later models, raise the vehicle and support it securely on jackstands, support the rear of the drive train using a floor jack or jackstand, remove the rear transaxle mount through-bolts and remove the mount, then remove the bracket-to-transaxle bolts and remove the bracket, with installation being the reverse of removal and all bolts tightened to the specified torque.