Make sure this part fits

Buick 24506309 Engine Exhaust Manifold

1997-2004 Buick

Customer Questions & Expert Answers (9)
GM 24506309 Engine Exhaust Manifold
  • Part Description
    Manifold, Exhaust ; Manifold, Engine Exhaust Manifold
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Buick
    Manufacturer Part Number24506309
    Part DescriptionManifold, Exhaust ; Manifold, Engine Exhaust Manifold
    Other NamesExhaust Manifold, Manifold
    Item Dimensions19.2 x 6.7 x 4.4 inches
    Item Weight14.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU24506309
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1997-2004 Buick Century6 Cyl 3.1LCUSTOM, GL, GLX, GS, LIMITED, LS, REGAL
    1997-2004 Buick RegalCUSTOM, GL, GLX, GS, LIMITED, LS, REGAL
    2002-2003 Buick Rendezvous6 Cyl 3.4LAWD, RENDEZVOUS
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 24506309 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What are the steps for removing the right-hand manifold with a 260, 305, or 350 cu in engine for the 1991 Oldsmobile Cutlass? Posted by Customer
    A:
    1. Disconnect the negative battery cable. 2. Hoist the car and place it firmly on jack stands. 3. Disconnect the exhaust pipe where it connects to the manifold, using penetrating oil if necessary. 4. Remove the right-front wheel for better access. 5. Pry back the metal retainers from the bolt heads. 6. Remove each of the manifold bolts. 7. Take the manifold out from under the vehicle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be done after installing the manifold for the 1988 Oldsmobile Cutlass? Posted by Customer
    A:
    Reinstall the remaining components in the reverse order of removal, ensuring to use a new gasket or packing at the crossover pipe flange.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done after disconnecting the battery for the 1989 Pontiac Grand Prix? Posted by Customer
    A:
    Next, unplug the electrical connector from the oxygen sensor, then remove the drivebelt and alternator.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done before starting the procedure for the 1998 Pontiac Grand Prix? Posted by Customer
    A:
    Allow the engine to cool completely before beginning this procedure.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be done with the exhaust manifold nuts for the 1994 Pontiac Grand Prix? Posted by Customer
    A:
    Remove the exhaust manifold nuts, support the engine if necessary, lower it to remove the steering gear heat shield, and then take off the exhaust manifold.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done after removing the exhaust pipe-to-manifold nuts for the 1996 Pontiac Grand Prix? Posted by Customer
    A:
    After that, remove the exhaust manifold brace and separate the exhaust pipe flange nuts from the manifold studs, pulling the pipe down slightly to break the seal.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done during the installation of the exhaust manifold for the 1990 Pontiac Grand Prix? Posted by Customer
    A:
    1. Clean the mating surfaces of the manifold and cylinder head, checking for warpage and cracks. 2. Resurface the manifold if the gasket was blown. 3. Position the manifold with a new gasket and install the bolts finger tight. 4. Tighten the bolts gradually from the middle outwards to the specified torque. 5. Reinstall the remaining components in reverse order. 6. Start the engine and check for exhaust leaks between the manifold and cylinder head as well as between the manifold and exhaust pipe.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done if warpage exceeds 0.030-inch for the 1994 Pontiac Grand Prix? Posted by Customer
    A:
    Take the manifold to an automotive machine shop for resurfacing.
    Posted by GMPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 24506309, the Right Choice

To ensure reliability, purchase GM part # 24506309 Engine Exhaust Manifold. It is sometimes referred to as Buick Exhaust Manifold. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Century, Regal, Rendezvous models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 24506309 Engine Exhaust Manifold. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Buick parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly