Buick 25515030 Rear Bumper Cover

You can Select Your Vehicle to check if 25515030 fits your vehicle.

Front bumper and bumper shock as viewed from underneath the vehicle. Remove the usually 4 retaining screws in each of the head light bezels and remove the bezels. Raise the car and support it securely. Remove the usually 6 push-on retainers from the bottom of the bumper and remove the 6 screws holding the retainer to each fender. Remove the usually 4 push-on retainers from the outer molding and partially remove the outer molding from the fenders. Remove the usually 2 sheet metal screws from the center bumper retainer, then remove the front bumper. Remove the usually 8 retaining screws and bolts from the impact bar and remove the impact bar from its reinforcements. To install, reverse the procedure above. Rear. Raise and support the car to a suitable work height. Remove the 2 push-on retainer clips from each end of the molding, then remove the molding. Remove the 4 wing nuts and electrical connectors from each of the tail lamp assemblies and remove the left and right tail lamp assemblies. Remove the 5 wing nuts, detach the electrical connector and remove the back-up light assembly. Open the trunk and remove the 2 retaining nuts from the left and right side reflectors, then remove the reflectors. Remove the 7 retaining pins from the valance panel and remove the panel. Disconnect the electrical connector and remove the 8 retaining nuts, 4 retaining bolts and 11 retaining pins from the rear bumper and remove the bumper. Disconnect the electrical connector, and remove the 8 retaining nuts from the impact bar and energy absorber. Remove the 8 retaining clips and remove the impact bar from the mounting support bracket. To install, reverse to install. Lower the vehicle.