How do you remove the caliper and Bracket for Buick Enclave,Chevrolet Traverse,GMC Acadia and Saturn Outlook?

To remove the brake caliper, start by loosening the wheel lug nuts and raising the vehicle on jackstands. Remove the wheels and then disconnect the brake hose from the caliper by removing the banjo fitting bolt. Remember to discard the sealing washers and plug the brake hose to prevent any contamination or fluid loss. Use hand tools to remove the upper guide pin bolt and securely hang the caliper out of the way if necessary. To remove the brake caliper bracket, remove the two bracket bolts and clean any remaining thread-locking material. For installation, use a high-temperature thread-lock on the brake caliper bracket bolts. Start by installing the caliper to the bracket, starting with the bolt closest to the bleed valve, and tighten the guide pin bolts to the proper torque specifications. Finally, bleed the brake system, check for any leaks, and test the brakes before returning the vehicle to normal service.

Genuine Saturn Outlook Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Calipers found

View related parts
Saturn Outlook Caliper Asm,Front Brake (W/O Brake Pads & Bracket)
Part Number: 21998526
$110.14 MSRP: $216.86
You Save: $106.72 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CALIPER, Wheel Brake Cylinder/Caliper; Caliper
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2010 Saturn Outlook | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD | 6 Cyl 3.6L
View related parts
Saturn Outlook Caliper Asm,Front Brake (W/O Brake Pads & Bracket)
Part Number: 21998527
$69.88 MSRP: $216.26
You Save: $146.38 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CALIPER, Wheel Brake Cylinder/Caliper; Caliper
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2010 Saturn Outlook | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD | 6 Cyl 3.6L
View related parts
Saturn Outlook Caliper Assembly, Rear Brake
Part Number: 15855609
$83.47 MSRP: $163.98
You Save: $80.51 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CALIPER, Wheel Brake Cylinder/Caliper; Caliper
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2010 Saturn Outlook | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD | 6 Cyl 3.6L
View related parts
Saturn Outlook Caliper Assembly, Rear Brake
Part Number: 15855616
$83.47 MSRP: $163.98
You Save: $80.51 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CALIPER, Wheel Brake Cylinder/Caliper; Caliper
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2010 Saturn Outlook | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD | 6 Cyl 3.6L

Saturn Outlook Brake Calipers Parts Questions & Experts Answers

Caliper Asm,Front Brake (W/O Brake Pads & Bracket)
21998527
Q: How do you remove the caliper and Bracket for Buick Enclave,Chevrolet Traverse,GMC Acadia and Saturn Outlook?
A: To remove the brake caliper, start by loosening the wheel lug nuts and raising the vehicle on jackstands. Remove the wheels and then disconnect the brake hose from the caliper by removing the banjo fitting bolt. Remember to discard the sealing washers and plug the brake hose to prevent any contamination or fluid loss. Use hand tools to remove the upper guide pin bolt and securely hang the caliper out of the way if necessary. To remove the brake caliper bracket, remove the two bracket bolts and clean any remaining thread-locking material. For installation, use a high-temperature thread-lock on the brake caliper bracket bolts. Start by installing the caliper to the bracket, starting with the bolt closest to the bleed valve, and tighten the guide pin bolts to the proper torque specifications. Finally, bleed the brake system, check for any leaks, and test the brakes before returning the vehicle to normal service.