Genuine Saturn LS1 Center Console

Saturn LS1 Center Console Parts Questions & Experts Answers

• Console,Front Floor *Medium Duty Dark.Pewter
  10376889
  Q: How to remove and install a center console in a Saturn LS and LS1?

  A: Disconnect the cable from the negative battery terminal. Remove the trim panels from each side of the console by sliding the trim panel back and out from the center console area. Remove the power window switches. Detach the parking brake boot from the console. Remove the cupholder assembly from the console by prying the cupholder panel out of the center console with a flat-bladed screwdriver. Disconnect the console wiring harness from below the cupholder housing. Remove the shift lever boot. On automatic transaxle models, pull up on the PRNDL cover and disconnect the lamp connector. On manual transaxle models, pull up on the boot and lift it over the shift handle. Slide the front seats forward and remove the console rear mounting screws, which are located one on each side of the console. Remove the console front mounting screws, which are located one on each side. Lift the center console from the vehicle. Installation is the reverse of removal. Finally, reconnect the battery.