How do you remove the fuel rail pressure sensor (FRPS) on Chevrolet Cobalt,HHR and Saturn ION?

Relieve the fuel system pressure first. Then, disconnect the Fuel Pressure Sensor (FRPS) electrical connector. To prevent fuel from entering the generator during FRPS removal and to catch some of the fuel from the fuel rail when the sensor is removed, place a towel on top of the generator. Using a 27mm socket, and being careful not to damage the foam insulator, remove the sensor. Fuel will drain from the opening in the fuel rail where the sensor was attached. This fuel must be washed away and the area dried prior to starting the vehicle. Installation is the reverse of removal. Upon starting the vehicle, immediately inspect for fuel leaks.

Genuine Saturn Ion Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Sensor found

View related parts
Saturn Ion Sensor,Fuel Tank Pressure
Part Number: 16238399
$48.12 MSRP: $98.40
You Save: $50.28 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Fuel Tank Meter/Pump
- Replaces: 12206740, 16217059, 16257276, 22678829, 09377680, 12219388, 16196060, 9377680
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2007 Saturn Ion | 2 DOOR, 4 DOOR, REDLINE 2 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L

Saturn Ion Fuel Pressure Sensor

The Fuel Pressure Sensor in Saturn Ion vehicles is otherwise known as the fuel tank pressure sensor is an important part of the engine which measures the pressure within the fuel tank and the rail. Subsequent to this, its major role is to transmit this pressure information to the computers of the vehicle so as to provide a means of changing the angles of timing of the engine to provide maximum efficiency. DTC refers to 'drive train control,' while several problems associate with the Fuel Pressure Sensor, ranging from a hard starting, poor fuel economy, or some engine performance issues identified by signal such as the check engine light. Some of the models of Saturn Ion might have used varied Fuel Pressure Sensors; these sensors could be from the fuel tank or the fuel rail. The main difference which can be identified is that one of them is designed to monitor the tank and the other- the rail pressure. It is required to maintain these sensors properly because if they fail, the performance and efficiency of the vehicle will be hurt greatly.

Each OEM Saturn Ion Fuel Pressure Sensor we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Saturn Ion Fuel Pressure Sensor Parts Questions & Experts Answers

Sensor,Fuel Tank Pressure
16238399
Q: How do you remove the fuel rail pressure sensor (FRPS) on Chevrolet Cobalt,HHR and Saturn ION?
A: Relieve the fuel system pressure first. Then, disconnect the Fuel Pressure Sensor (FRPS) electrical connector. To prevent fuel from entering the generator during FRPS removal and to catch some of the fuel from the fuel rail when the sensor is removed, place a towel on top of the generator. Using a 27mm socket, and being careful not to damage the foam insulator, remove the sensor. Fuel will drain from the opening in the fuel rail where the sensor was attached. This fuel must be washed away and the area dried prior to starting the vehicle. Installation is the reverse of removal. Upon starting the vehicle, immediately inspect for fuel leaks.