My Garage
My Account
Cart
Genuine Pontiac Vibe Wiper Motor
Windshield Wiper Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Wiper Motors found
Pontiac Vibe Wiper Motor
More specifically, the Wiper Motor of the Pontiac Vibe is useful in that it operates the windshield wipers in order to wipe rain, snow or any body on the glass. This electric motor runs at different speeds with the help of which, the drivers can set the movement of the wipers depending on the weather. Pontiac Vibe Wiper Motors are offered in new and rebuilt variety. New Wiper Motors on the other hand are purchased directly from the manufacturing company and the reconditioned units can also be believed to have been used before but have since been modified to meet new production requirements. This variety guarantees that people who own Pontiac Vibe cars can select on this kind of model that will help them be very relevant while doing their activities when weather conditions are poor but at the same time, the visibility is highly ensured.
Each OEM Pontiac Vibe Wiper Motor we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Pontiac Vibe Wiper Motor Parts Questions & Experts Answers
- Q: How to check the wiper motor circuit on Pontiac Vibe?A: Having ensured you understand the wiring diagrams and locations of various wires, the following are the steps that one would have to follow to check the wiper motor circuit, Making use of the 12 volt test light touch each terminal in turn that is at a connector to check voltage. If wipers run slow, check battery condition and charge if needed; if wiper motor is suspect replace the motor and while wiper motor is out manually operate the wiper arms and check for binding in the linkage and pivots and lubricate or repair as needed before reinstalling the motor. If wipers still operate slowly, check for loose or corroded connections, especially the ground and if connections tested good, replace the motor. If wipers are not working, check the Fuse in the driver side interior fuse box, if it is good, connect a jumper wire between the wiper motor ground terminal and ground and then turn on the wipers. If the motor is running, fix the ground; if the motor is not running, check for the voltage at the motor with the wiper switch on high. To work on the electrical connector, the cowl louver panels needs to be removed. If there is voltage at the connector, remove the motor and apply tests off the car using fused jumper wires connected to a battery. If it works, look for binding linkage; if it does not, replace the motor. If there is no voltage to the motor, go and check the voltage at the wiper control relays; if voltage is present at the relay but not at the motor, it is advised to test the switch; if the switch turns out to be good, then the wiper control relay may be a problem. For inoperative interval function, refer to the continuity of wires between the switch and wiper control module. If wipers do not park when the switch is turned off, look for voltage at the park feed wire of the wiper motor connector with the switch off and ignition on; if there is no voltage, look for a break in the circuit between the wiper motor and the fuse panel. For replacement, remove the negative battery terminal, remove covers over the wiper arm mounting nuts, and then remove the nuts while noting the relative position between the wiper arms and the spindles before lifting up the wiper arms. First, remove the cowl louver panels, then unplug the wiper motor harness connector, and finally, unscrew the windshield wiper motor/linkage assembly. Move the assembly towards the passenger side to pull the rubber pin near the motor from the cowl sheet metal then pull the assembly out. Take off the linkage from the motor arm, unbolt the wiper motor and detach the motor from the frame with the procedure for assembly being the reverse of disassembly. For the liftgate rear wiper, unbolt the wiper arm and wiper arm cover and then open the liftgate and pull off the rear wiper assembly trim panel using a trim tool. Detach and unscrew the electrical junction of the wiper assembly, then remove the mounting bolts and assemble together with the wiper assembly, and then reverse the process.
