My Garage
My Account
Cart
Genuine Pontiac Vibe Tie Rod End
Steering Rod End- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Tie Rod Ends found
Pontiac Vibe Rod Kit,Steering Linkage Outer Tie
Part Number: 88972118$34.80 MSRP: $70.18You Save: $35.38 (51%)Ships in 1-2 Business Days
Pontiac Vibe Rod Kit,Steering Linkage Outer Tie
Part Number: 19184334$57.04 MSRP: $72.63You Save: $15.59 (22%)Ships in 1-2 Business Days
Pontiac Vibe Tie Rod End
The inner and outer tied rod ends together make up the Tie Rod End in Pontiac Vibe where the vehicle steering system depends on. Such parts connect the steering rack to the steering knuckles which should provide the car with stability and allow accurate control of its direction. Another important function of the Tie Rod End is to support the car's stability and to reflect driver's steering commands. What these models do is use this mechanism in order to ensure that a stable and quite enjoyable drive is provided by the relevant Pontiac Vibe models. This is due the basic structure and function in any automotive vehicles especially the Tie Rod End on Pontiac Vibe which has been of connecting important steering assembly in order to allow precise control and handling. The Tie Rod End can be stated as playing the crucial role in the concerns of performance and safe handling of the vehicle's steering attributes.
Each OEM Pontiac Vibe Tie Rod End we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Pontiac Vibe Tie Rod End Parts Questions & Experts Answers
- Q: How do you remove and install a tie-rod end on Pontiac Vibe?A: Before disconnecting the tie-rod, it will be necessary to loosen the wheel lugs, raise the car's front, securely jacked-up and then block the rear wheels before finally removing the front wheel to have a proper angle at the tie-rod. Next, unbolt the cotter pin and then turn the nut on the tie-rod end stud until loose but do not remove the nut. Now using locking-pliers or wrench keep applying pressure on the tie-rod while turning the nut just enough to scratch the aluminum facing of the tie-rod in relation to the nut-thread. Use a puller to separate the knuckle arm from the tie rod, remove the associated nut, and finally, separate the tie--rod. Remove the nut and washer from the tie-rod and take off the tie-rod end. For installation, put the tie-rod end at the position marked and thread the tie-rod stud through the steering knuckle arm then tighten the jam nut. Screw the castle nut over the stud and turn it on the thread until it is as tight as it can be then place a new cotter pin and take care to have its hole lined up with one of the slots in the nut. Last, set the wheel and the lug nuts, jack down the vehicle, torque the lug nuts and check the alignment and adjust it, if required.
