How to Replace the Thermostat of Cooling System for your Toyota Matrix and Pontiac Vibe?

Do various checks, check the coolant level, and the drive-belt tension, and the temperature gauge. The previous information will help you determine if the thermostat is faulty or not. If the engine fails warm up it can be that the thermostat is stuck open but if the engine runs hot and the radiator hose does not heat up the engine may overheat. To remove the thermostat, start by detaching the battery negative terminal and draining the coolant. Detach the alternator as well as the thermostat housing from the engine. Gently remove the thermostat and clean the sealing area. Install the housing, refill the cooling system, run the engine, and check for any leaks. Once you complete the replacement procedure, You should feel the radiator hose and if it is warm, that means that the coolant is flowing properly.

Genuine Pontiac Vibe Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Thermostats found

View related parts
Pontiac Vibe Thermostat,Engine Coolant
Part Number: 88974571
Product Specifications
- Other Name: THERMOSTAT, Engine Coolant Temperature; Thermostat
- Replaces: 88969605, 19185390, 88972744
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2010 Pontiac Vibe | 4 DOOR AWD, ALL PURPOSE 4 DOOR, ALL PURPOSE 4 DOOR AWD, ALL PURPOSE 4 DOOR GT, FWD GT | 4 Cyl 1.8L, 4 Cyl 2.4L
View related parts
Pontiac Vibe Housing,Engine Coolant Thermostat
Part Number: 88969604
Product Specifications
- Other Name: HOUSING, Engine Coolant Thermostat; Thermostat Housing, Water Inlet
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Pontiac Vibe | ALL PURPOSE 4 DOOR GT | 4 Cyl 1.8L
View related parts
Pontiac Vibe HOUSING,ENG COOL THERM
Part Number: 19205639
$29.61 MSRP: $46.60
You Save: $16.99 (37%)
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Pontiac Vibe | ALL PURPOSE 4 DOOR | 4 Cyl 1.8L
View related parts
Pontiac Vibe Housing,Engine Coolant Thermostat
Part Number: 94859856
Product Specifications
- Other Name: HOUSING, Engine Coolant Thermostat; Thermostat Housing, Water Inlet
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2008 Pontiac Vibe | ALL PURPOSE 4 DOOR, ALL PURPOSE 4 DOOR AWD | 4 Cyl 1.8L
View related parts
Pontiac Vibe Housing,Engine Coolant Thermostat
Part Number: 19185387
Product Specifications
- Other Name: HOUSING, Engine Coolant Thermostat; Cover, Thermostat Housing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Pontiac Vibe | 4 DOOR AWD, ALL PURPOSE 4 DOOR, FWD GT | 4 Cyl 2.4L

Pontiac Vibe Thermostat Parts Questions & Experts Answers

Housing,Engine Coolant Thermostat
94859856
Q: How to Replace the Thermostat of Cooling System for your Toyota Matrix and Pontiac Vibe?
A: Do various checks, check the coolant level, and the drive-belt tension, and the temperature gauge. The previous information will help you determine if the thermostat is faulty or not. If the engine fails warm up it can be that the thermostat is stuck open but if the engine runs hot and the radiator hose does not heat up the engine may overheat. To remove the thermostat, start by detaching the battery negative terminal and draining the coolant. Detach the alternator as well as the thermostat housing from the engine. Gently remove the thermostat and clean the sealing area. Install the housing, refill the cooling system, run the engine, and check for any leaks. Once you complete the replacement procedure, You should feel the radiator hose and if it is warm, that means that the coolant is flowing properly.