How do you remove the Ignition Coil on Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?

On L4 engines. remove the distributor cap. On L4 engines, label the spark plug wires as to their position on the cap and remove them. On V6 engines, remove the spark plug wire retaining ring from the top of the distributor. Remove the coil cover from the distributor cap. Note the position of each wire, duly marking them if necessary. Remove the coil ground wires then push the leads from the underside of the connectors. Remove the coil from the distributor cap. Installation is the reverse of the removal procedure, but ensure that the leads are connected to their original positions. Damage to the control module and ignition coil can result if the leads are connected incorrectly.

Genuine Pontiac Phoenix Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
Pontiac Phoenix Ignition Coil Kit
Part Number: 12498046
Product Specifications
- Other Name: Coil Kit,Ignition; Coil, Ignition Coil
- Replaces: 01115455, 1115455
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1984 Pontiac Phoenix | 2 DOOR, 4 DOOR, LJ 2 DOOR, LJ 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L

Pontiac Phoenix Ignition Coil

The Pontiac Phoenix Ignition Coil is a rather essential component whose function is to function as a transformer of voltages, namely the one received from the battery, to a high voltage necessary to ignite the Air/Fuel mixture in cylinders. This change occurs through the primary and secondary windings provided in the coil housing with an iron core. Depending on the used ignition system the coil can be connected to a distributor cap or directly to every spark plug. Sometimes, the ignition coil could fail to work which can cause the vehicle not to start or it can cause hard starting, poor running and powering. Depending on the make of the vehicle, there are various ignition systems that include DIS, COP, and CNP which uses different coil set-up to ensure that sparks get to the cylinders. Ignition coil wear and tear also affects performance of a car; therefore, it is always recommended that ignition coil be checked and replaced often, especially when the motor light is on.

Each OEM Pontiac Phoenix Ignition Coil we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Pontiac Phoenix Ignition Coil Parts Questions & Experts Answers

Ignition Coil Kit
12498046
Q: How do you remove the Ignition Coil on Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?
A: On L4 engines. remove the Distributor Cap. On L4 engines, label the spark plug wires as to their position on the cap and remove them. On V6 engines, remove the spark plug wire retaining ring from the top of the distributor. Remove the coil cover from the distributor cap. Note the position of each wire, duly marking them if necessary. Remove the coil ground wires then push the leads from the underside of the connectors. Remove the coil from the distributor cap. Installation is the reverse of the removal procedure, but ensure that the leads are connected to their original positions. Damage to the control module and ignition coil can result if the leads are connected incorrectly.