How do you remove and install the windshield wiper motor and linkage assembly on Pontiac G6?

Remove the windshield wiper trim caps with the help of a trim removal tool or a screwdriver to be able to see the wiper arms. Loosen and take off the retainer nuts and washers of the wipers, being sensitive to the locations of each wiper arm in relation to its shaft. Then, there is the hood seal and the cowl cover that you ought to remove as well. Remove the electrical connector of the wiper motor and the three mounting bolts which hold the wiper motor and linkage assembly to the cowl of the car, then pull off the wiper module from the car. Pop off the 'linkage' from the 'wiper motor crank arm', and take off the nut that connects the 'actuator arm' to the 'motor shaft'. Before removing the actuator arm, align the position of the former to the latter to keep the motor shaft's relationship. To dismantle the dishwasher remove the motor mounting screws and pull out the motor. To install it, reverse the above removal procedures whereby; make sure to align the marks made earlier on the actuator arm and motor shaft, the same way; the wiper arm and its shaft.

Genuine Pontiac G6 Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Motors found

View related parts
Pontiac G6 Motor,Windshield Wiper
Part Number: 20907861
$63.91 MSRP: $181.14
You Save: $117.23 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: MOTOR, Windshield Wiper Motor; Front Motor, Wiper Motor
- Replaces: 25895883
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Pontiac G6 | GT 2 DOOR CONVERTIBLE, GT 2 DOOR NOTCHBACK, GT 4 DOOR NOTCHBACK, GXP 2 DOOR NOTCHBACK, GXP 4 DOOR NOTCHBACK, SE 4 DOOR NOTCHBACK, SE1 2 DOOR NOTCHBACK, SE1 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.6L, 6 Cyl 3.9L
View related parts
Pontiac G6 Motor Assembly, Windshield Wiper (Service)
Part Number: 22711010
$96.32 MSRP: $175.12
You Save: $78.80 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: MOTOR, Windshield Wiper Motor; Front Motor, Front Transmission, Wiper Motor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Pontiac G6 | GT 2 DOOR CONVERTIBLE, GT 2 DOOR NOTCHBACK, GT 4 DOOR NOTCHBACK, GTP 2 DOOR CONVERTIBL, GTP 2 DOOR NOTCHBACK, SE 4 DOOR NOTCHBACK, SE1 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 6 Cyl 3.5L, 6 Cyl 3.6L, 6 Cyl 3.9L

Pontiac G6 Wiper Motor

The Wiper Motor is the component in Pontiac G6 car that is responsible for operating the windshield wipers to wipe the windshield with rain, snow and anything that is on the glass. This electric motor runs at some pulse rate and the drivers have the control on the speed of the wiper depending on the weather prevailing. Pontiac G6 Wiper Motors come with new and refurbished providers on the pack. New Wiper Motors are obtained directly from the manufacturing companies whereas second hand Wiper Motors are recycled or used ones but are restored to meet new production lines or specifications. The main difference between these types is the condition and the reliability with new motors are usually more reliable than remanufactured motors.

Each OEM Pontiac G6 Wiper Motor we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Pontiac G6 Wiper Motor Parts Questions & Experts Answers

Motor,Windshield Wiper
20907861
Q: How do you remove and install the windshield wiper motor and linkage assembly on Pontiac G6?
A: Remove the windshield wiper trim caps with the help of a trim removal tool or a screwdriver to be able to see the wiper arms. Loosen and take off the retainer nuts and washers of the wipers, being sensitive to the locations of each wiper arm in relation to its shaft. Then, there is the hood seal and the cowl cover that you ought to remove as well. Remove the electrical connector of the wiper motor and the three mounting bolts which hold the wiper motor and linkage assembly to the cowl of the car, then pull off the wiper module from the car. Pop off the 'linkage' from the 'wiper motor crank arm', and take off the nut that connects the 'actuator arm' to the 'motor shaft'. Before removing the actuator arm, align the position of the former to the latter to keep the motor shaft's relationship. To dismantle the dishwasher remove the motor mounting screws and pull out the motor. To install it, reverse the above removal procedures whereby; make sure to align the marks made earlier on the actuator arm and motor shaft, the same way; the wiper arm and its shaft.