Genuine Pontiac G6 Hazard Warning Switch

Hazard Warning Emergency Light Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hazard Warning Switch found

  • Pontiac G6 Hazard Warning Switch - 15258591
    View related parts

    Pontiac G6 Switch Assembly, Hazard Warning

    Part Number: 15258591
    $51.13 MSRP: $144.96
    You Save: $93.83 (65%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: SWITCH, Chassis/Body Marker/Hazard; Hazard Switch
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2005-2010 Pontiac G6 | GT 2 DOOR CONVERTIBLE, GT 2 DOOR NOTCHBACK, GT 4 DOOR NOTCHBACK, GTP 2 DOOR CONVERTIBL, GTP 2 DOOR NOTCHBACK, GXP 2 DOOR NOTCHBACK, GXP 4 DOOR NOTCHBACK, SE 4 DOOR NOTCHBACK, SE1 2 DOOR NOTCHBACK, SE1 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.6L, 6 Cyl 3.9L

Pontiac G6 Hazard Warning Switch

Each OEM Pontiac G6 Hazard Warning Switch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Pontiac G6 Hazard Warning Switch Parts Questions & Experts Answers

  • Q: Where is the Hazard Warning Switch and instrument panel dimmer switch located and How to remove and install on Pontiac G6?
    A: The adjustable pedal button, instrument panel dimmer switch, and fog light switch assembly is located on a small trim panel to the left of the steering column, and while not all vehicles have all three switches, the following procedure applies to all. Begin by using a trim panel removal tool or a thin piece of wood or plastic to carefully pry the panel housing the switches out of the instrument panel and disconnect the electrical connector(s). To remove any of the switches from the trim panel, squeeze the retaining tabs and push the switch out. For installation, push the switch into the trim panel until it snaps into place. Reconnect the electrical connector(s) and align the mounting clips on the panel with their corresponding slots in the instrument panel, pushing the panel firmly until the clips snap into place. For the hazard flasher switch, remove the center trim panel, pop the switch out of the panel, and disconnect the electrical connector. Installation follows the reverse order of removal.

Related Pontiac G6 Parts