My Garage
My Account
Cart
Genuine Pontiac G6 Engine Mount
Engine Motor Mount- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
16 Engine Mounts found
Pontiac G6 Mount Assembly, Engine
Part Number: 22708433$117.75 MSRP: $193.56You Save: $75.81 (40%)Ships in 1-2 Business Days
Pontiac G6 Bracket, Engine Mount Snubber
Part Number: 15235774$4.05 MSRP: $6.38You Save: $2.33 (37%)Ships in 1-3 Business Days
Pontiac G6 Bracket, Engine Mount Snubber
Part Number: 25791904$51.42 MSRP: $80.91You Save: $29.49 (37%)Ships in 1-3 Business Days
Pontiac G6 Mount Assembly, Engine
Part Number: 25852869$86.49 MSRP: $137.93You Save: $51.44 (38%)Ships in 1-2 Business Days
Pontiac G6 Mount,Engine
Part Number: 25852870$82.26 MSRP: $129.41You Save: $47.15 (37%)Ships in 1-2 Business Days
Pontiac G6 Mount Assembly, Engine
Part Number: 15299167$118.79 MSRP: $169.22You Save: $50.43 (30%)Ships in 1-2 Business Days
Pontiac G6 Engine Mount
Each OEM Pontiac G6 Engine Mount we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Pontiac G6 Engine Mount Parts Questions & Experts Answers
- Q: What should be done if engine mounts are broken or deteriorated in 3.6L V6 engine on Pontiac G6?A: Engine mounts are generally highly reliable, but when an engine-mount is broken or worn it requires replacement as soon as possible in order to avoid damaging to the components of the driveshaft. This is done merely by lifting the engine slightly off the mount hence relieving the weight pressure on the mounts. First, prepare the vehicle by jacking it up and putting it on jackstands, then place a jack under the engine oil pan laying a big piece of wood on it so that it would not directly touch the oil pan, then raise the engine a little bit off the mount but do not support the engine completely with the jack. If the mount is accessible, check for cracks, hardened rubber or the rubber has deteriorated or has come unstuck from the metal plates, the rubber is usually split down the middle. Insert a large screwdriver or pry bar between the mount plates and the engine or frame; if them plates move easily, check the tightness of the mount fasteners; broken mounts make it quite easy for the engine to move when pried or under load. To remove it, the cable should be disconnected from the negative battery terminal; the drivebelt has to be removed, and the engine top cover and air filter assembly taken off. Lift the vehicle off the stands and re-place it on two jackstands in a secure position again. Place the car on an engine support fixture or employ a floor jack and support the oil pan with a wooden plank. Remove one of the top bolts in the upper engine mount bracket so that it slightly moves and take off all but one bolt in the bracket that is pivoting. Two nuts that supply the mount with the upper mount bracket are to be detached, the next thing is to un-bolt the lower mount bracket from the car frame and then take the mount off together with the lower bracket but in the process, the mount becomes separated from the lower bracket. It removes from the computer in an inversative order to the one it uses during installation.
