How do you remove the coolant reservoir?

To remove the coolant reservoir, start by draining the cooling system and disconnecting the battery. Then, unbolt the underhood fuse/relay box and move it aside. Disconnect the expansion tank return hose and air bleed hose, and remove the mounting fasteners for the expansion tank. Disconnect the Low Coolant Level sensor connector and remove the tank. Clean the tank thoroughly and inspect it for cracks, replacing it if necessary. To install the reservoir, simply reverse the removal steps. For models with a coolant reservoir, disconnect the battery and remove the air filter housing/engine cover assembly. Remove the reservoir mounting fastener and take out the reservoir. Installation is the reverse of removal.

Genuine Pontiac G5 Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
Pontiac G5 Tank Assembly, Radiator Surge
Part Number: 15226536
Product Specifications
- Other Name: TANK, Engine Coolant Recovery; Reservoir
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2010 Pontiac G5 | 2 DOOR, 4 DOOR, GT 2 DOOR, GT 4 DOOR, LS 2 DOOR, LS 4 DOOR, SE 2 DOOR, SE 4 DOOR, SPORT 2 DOOR, SPORT 4 DOOR | 4 Cyl 2.2L, 4 Cyl 2.4L

Pontiac G5 Coolant Reservoir

Each OEM Pontiac G5 Coolant Reservoir we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Pontiac G5 Coolant Reservoir Parts Questions & Experts Answers

Tank Assembly, Radiator Surge
15226536
Q: How do you remove the coolant reservoir?
A: To remove the coolant reservoir, start by draining the cooling system and disconnecting the battery. Then, unbolt the underhood fuse/relay box and move it aside. Disconnect the expansion tank return hose and air bleed hose, and remove the mounting fasteners for the expansion tank. Disconnect the Low Coolant Level sensor connector and remove the tank. Clean the tank thoroughly and inspect it for cracks, replacing it if necessary. To install the reservoir, simply reverse the removal steps. For models with a coolant reservoir, disconnect the battery and remove the air filter housing/engine cover assembly. Remove the reservoir mounting fastener and take out the reservoir. Installation is the reverse of removal.