How to remove and install the Coil Spring Insulator and Coil Spring on Pontiac Firebird?

Raise the rear of the vehicle and support it on jackstands while also supporting the rear axle assembly on a hydraulic jack. Remove the track bar mounting bolt at the axle assembly on the left side and loosen the track bar bolt at the body brace on the right side. Disconnect the rear brake hose clip from the vehicle underbody to allow additional axle drop, ensuring not to suspend the axle by the brake hose to avoid damage. Remove the lower shock absorber mounting nut from both rear shocks, and for vehicles equipped with a 4-cylinder engine, remove the driveshaft. Carefully lower the jack under the rear axle assembly until the spring or insulator can be removed. To install, position the spring and insulator in the spring seat and raise the hydraulic jack until the spring is normally compressed. Attach the shocks to the rear axle and tighten the nuts to the specified torque, then install the track bar mounting bolt at the axle and tighten the nut to the specified torque. Tighten the track bar-to-body bracket nut to the specified torque and attach the brake hose clip to the underbody. For 4-cylinder vehicles, install the driveshaft, then remove the jackstands and lower the vehicle.

Genuine Pontiac Firebird Coil Spring Insulator

Coil Spring Noise Insulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Coil Spring Insulators found

View related parts
Pontiac Firebird Insulator Assembly, Rear Spring Upper
Part Number: 10290379
Product Specifications
- Other Name: INSULATOR, Rear Spring
- Position: Rear Upper
- Replaces: 10019587
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-2002 Pontiac Firebird | 2 DOOR, CONVERTIBLE, COUPE | 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.1L, 6 Cyl 3.4L, 6 Cyl 3.8L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Pontiac Firebird Insulator, Front Spring
Part Number: 14047915
Product Specifications
- Other Name: Spring Insulator, Spring Pad
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1992 Pontiac Firebird | 2 DOOR, CONVERTIBLE | 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.1L, 6 Cyl 3.8L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Pontiac Firebird Insulator,Front Spring Lower
Part Number: 22113814
Product Specifications
- Other Name: INSULATOR, Front Spring; Insulator, Strut Lower Insulator
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Pontiac Firebird | 2 DOOR, CONVERTIBLE, COUPE | 6 Cyl 3.4L, 6 Cyl 3.8L, 8 Cyl 5.7L
View related parts
Pontiac Firebird Bumper Assembly, Rear Suspension Jounce
Part Number: 10282449
Product Specifications
- Other Name: BUMPER, Rear Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Pontiac Firebird | 2 DOOR, CONVERTIBLE, COUPE | 6 Cyl 3.8L, 8 Cyl 5.7L
- 1996 Pontiac Firebird | 2 DOOR | 6 Cyl 3.8L, 8 Cyl 5.7L
View related parts
Pontiac Firebird Seat,Front Spring
Part Number: 22099275
Product Specifications
- Other Name: SEAT, Front Spring; Spring Seat
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Pontiac Firebird | 2 DOOR, COUPE | 6 Cyl 3.4L, 6 Cyl 3.8L, 8 Cyl 5.7L

Pontiac Firebird Coil Spring Insulator

Coil Spring Insulator used in Pontiac Firebird cars plays a very important part in reducing the levels of vibrations between the coil springs and the body of the car. As a result, it acts as a rubber isolator and thus protects coil spring and the frame from wearing out quickly, making them to last longer. Over the years, there have been many Coil Spring Insulator styles in the Pontiac Firebird models, and every one of these styles serve the purpose of reducing vibration. The intended use however does not change between these types and fundamental to them is the mitigation of damage and increasing ride comfort. The differences, if any, can be in terms of some design elements or material implemented, based on the requirements of a particular generation of Firebird.

Each OEM Pontiac Firebird Coil Spring Insulator we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Pontiac Firebird Coil Spring Insulator Parts Questions & Experts Answers

Insulator Assembly, Rear Spring Upper
10290379
Q: How to remove and install the Coil Spring Insulator and Coil Spring on Pontiac Firebird?
A: Raise the rear of the vehicle and support it on jackstands while also supporting the rear axle assembly on a hydraulic jack. Remove the track bar mounting bolt at the axle assembly on the left side and loosen the track bar bolt at the body brace on the right side. Disconnect the rear brake hose clip from the vehicle underbody to allow additional axle drop, ensuring not to suspend the axle by the brake hose to avoid damage. Remove the lower Shock Absorber mounting nut from both rear shocks, and for vehicles equipped with a 4-cylinder engine, remove the driveshaft. Carefully lower the jack under the rear axle assembly until the spring or insulator can be removed. To install, position the spring and insulator in the spring seat and raise the hydraulic jack until the spring is normally compressed. Attach the shocks to the rear axle and tighten the nuts to the specified torque, then install the track bar mounting bolt at the axle and tighten the nut to the specified torque. Tighten the track bar-to-body bracket nut to the specified torque and attach the brake hose clip to the underbody. For 4-cylinder vehicles, install the driveshaft, then remove the jackstands and lower the vehicle.