How do you remove and install the latch assembly on Pontiac Fiero?

When removing the latch assembly it is necessary to remove the trim panel first, and then the water deflector second. Remove the inside rearview mirror and unhook the remote handle lock rod from the lock cylinder to latch rod at the lock assembly as the spring clips are used to connect the rods and rods to levers and handles respectively, and have a slot to allow their disconnection. In the event the vehicle has a door ajar switch electrical lead in the door, remove the switch from the latch assembly before continuing. Subsequently, depress the latch assembly, undo the latch assembly screws and take the latch assembly out together with the outside handle lock rod. In installation, the placement of spring clips should be done on the new latch assembly, followed by its positioning and the instalment of the lock rods. Bolt the latch assembly in place using the mounting screws which should be tightened to the recommended torque. If the vehicle is equipped with a door mounted do-a-jar switch install the electrical lead and check the operation of the door ajar switch before reinstalling the water deflector and the door trim panel.

Genuine Pontiac Fiero Door Latch Assembly

Door Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Door Latch Assemblys found

View related parts
Pontiac Fiero Front Door Lock Actuator Assembly
Part Number: 22062740
Product Specifications
- Other Name: Actr Assembly, Front Door Lock ; Actuator, Door Electric And Vacuum Locks
- Position: Front
- Replaces: 22020256, 22049686
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Pontiac Fiero | 2 DOOR, GT 2 DOOR, SE 2 DOOR, SPORT 2 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L
View related parts
Pontiac Fiero Front Side Door Lock Assembly
Part Number: 16608173
Product Specifications
- Other Name: Lock Asm,Front Side Door; Lock
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Pontiac Fiero | 2 DOOR, GT 2 DOOR, SE 2 DOOR, SPORT 2 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L
View related parts
Pontiac Fiero Front Side Door Lock Assembly
Part Number: 16608172
Product Specifications
- Other Name: Lock Asm,Front Side Door; Lock
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Pontiac Fiero | 2 DOOR, GT 2 DOOR, SE 2 DOOR, SPORT 2 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L

Pontiac Fiero Door Latch Assembly

In particular, the Door Latch Assembly can be installed on Pontiac Fiero vehicles to lock the doors and thus, ensure that only the owner would be able to open the door and get into the car. This assembly can be operated on the manual mode or in the auto mode where one can lock or unlock the doors from the center console. Popular types of Door Latch Assemblys used over the years in Pontiac Fiero have been developed to be long lasting accompanied with simple operating systems. Nevertheless, these assemblies may need substitution because of typical problems like defective exterior door handles, sticking elements or problems with the lock button on the door. The proper functioning of the Pontiac Fiero Door Latch Assembly should be checked and maintained to provide the car functional solidity.

Each OEM Pontiac Fiero Door Latch Assembly we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Pontiac Fiero Door Latch Assembly Parts Questions & Experts Answers

Front Door Lock Actuator Assembly
22062740
Q: How do you remove and install the latch assembly on Pontiac Fiero?
A: When removing the latch assembly it is necessary to remove the trim panel first, and then the water deflector second. Remove the inside rearview mirror and unhook the remote handle lock rod from the lock cylinder to latch rod at the lock assembly as the spring clips are used to connect the rods and rods to levers and handles respectively, and have a slot to allow their disconnection. In the event the vehicle has a door ajar switch electrical lead in the door, remove the switch from the latch assembly before continuing. Subsequently, depress the latch assembly, undo the latch assembly screws and take the latch assembly out together with the outside handle lock rod. In installation, the placement of spring clips should be done on the new latch assembly, followed by its positioning and the instalment of the lock rods. Bolt the latch assembly in place using the mounting screws which should be tightened to the recommended torque. If the vehicle is equipped with a door mounted do-a-jar switch install the electrical lead and check the operation of the door ajar switch before reinstalling the water deflector and the door trim panel.