When should front wheel bearings be inspected for Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?

In most instances, the front wheel bearings will not require servicing until the brake pads are altered. However, these bearings ought to be inspected whenever the front wheels are elevated for any reason. When the vehicle is securely supported on jack stands, the wheel should be spun to check for noise, rolling resistance or free play. The top of the tire should be grabbed with one hand and the bottom of the tire with the other, moving the tire in and out on the spindle. If it moves more than 0.005 in, the bearings should be inspected, and replaced if necessary.

Genuine Oldsmobile Omega Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Bearings found

View related parts
Oldsmobile Omega Front Wheel Bearing
Part Number: 457052
$38.08 MSRP: $66.52
You Save: $28.44 (43%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bearing,Front Wheel Inner
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1984 Oldsmobile Omega | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L
View related parts
Oldsmobile Omega Rear Wheel Bearing (Service)
Part Number: 7470599
Product Specifications
- Other Name: Hub Asm,Rear Wheel (Service) ; Hub, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1984 Oldsmobile Omega | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L
View related parts
Oldsmobile Omega Front Wheel Bearing (W/Bearing)
Part Number: 7470002
Product Specifications
- Other Name: Hub,Front Wheel (W/Bearing)
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1984 Oldsmobile Omega | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L

Oldsmobile Omega Wheel Bearing

The Wheel Bearing from the model Oldsmobile Omega is very important component in the working of wheels as it eliminates friction while operating. This component stands as quite essential in ensuring a good performance of the car and also its safety. Oldsmobile Omega models use three basic styles of hub and bearing system, the primary of which is the unit or integral hub and bearing assembly which comes with an ABS sensor as a standard equipment and is replaced as a complete assembly. Further, some of the front-wheel-drive Omega publics might have steering knuckle demands for servicing, the non-driven axle hubs contain a tapered roller bearings element that is replaceable. Daily, Weekly or Bi-weekly check and inspection of the Wheel Bearing is crucial because worn loose bearings may cause noise, vibration, or even possible wheel detachment. The correct operation presupposes that the stated parts and surfaces are smooth; bearings are greased with the high-temperature resistant oils after their change.

Each OEM Oldsmobile Omega Wheel Bearing we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Oldsmobile Omega Wheel Bearing Parts Questions & Experts Answers

Front Wheel Bearing
457052
Q: When should front wheel bearings be inspected for Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?
A: In most instances, the front wheel bearings will not require servicing until the brake pads are altered. However, these bearings ought to be inspected whenever the front wheels are elevated for any reason. When the vehicle is securely supported on jack stands, the wheel should be spun to check for noise, rolling resistance or free play. The top of the tire should be grabbed with one hand and the bottom of the tire with the other, moving the tire in and out on the spindle. If it moves more than 0.005 in, the bearings should be inspected, and replaced if necessary.