How to remove and reinstall the rectangular and round motor types for the washer pump on Oldsmobile Cutlass?

The rectangular motor type for the washer pump involves removing it independently from the wiper motor by disconnecting the washer hoses and electrical wiring. The pump can be lifted off the motor after removing the mounting screws and the four lobe washer pump drive cam. The felt washer on the wiper shaft should be removed, followed by the solenoid assembly and ratchet dog. The ratchet wheel can be taken off by moving the spring out of the shaft groove. To separate the pump and pump actuator plate from the frame, the pump housing should be pulled towards the valve end. Reassembly and installation are the reverse of the removal procedure. For the round motor type, the washer hoses and wires should be disconnected from the pump relay. The plastic pump cover can be removed, and then the pump and frame can be withdrawn by removing the frame screws. The ratchet dog, pawl, ratchet spring, and other components should be removed. The relay coil and terminal board can be detached by chiseling off the tabs. The plastic pump housing can be removed by pulling it towards the valve end, and the valve can be separated from the housing by removing the screws. Reassembly should be done with the wiper motor in the 'Park' position.

Genuine Oldsmobile Cutlass Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Washer Pumps found

View related parts
Oldsmobile Cutlass Pump Asm,Windshield Washer
Part Number: 19244681
$50.17 MSRP: $94.66
You Save: $44.49 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PUMP KIT, Windshield Washer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Oldsmobile Cutlass | SEDAN LEVEL I, SEDAN LEVEL II | 6 Cyl 3.1L
View related parts
Oldsmobile Cutlass Pump Kit,Windshield Washer W/ Seal
Part Number: 89025062
$72.20 MSRP: $131.28
You Save: $59.08 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PUMP, Windshield Washer; Front Washer Pump, Rear Washer Pump, Washer Pump
- Replaces: 22054183, 22039339, 22086739, 22122104, 19150494, 22111435, 22054186, 22071428, 22127653, 88958231
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 Oldsmobile Cutlass | 2 DOOR, 4 DOOR, BROUGHAM 4 DOOR, BROUGHAM SL 2 DOOR, BROUGHAM STATION WAGON, SL 2 DOOR, SL 4 DOOR, SL STATION WAGON, STATION WAGON | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.1L, 6 Cyl 3.3L, 6 Cyl 3.4L, 6 Cyl 3.8L
View related parts
Oldsmobile Cutlass Pump, Windshield Washer
Part Number: 22048650
Product Specifications
- Other Name: Washer Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Oldsmobile Cutlass | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 2 DOOR NOTCHBACK, BROUGHAM 4 DOOR, BROUGHAM SL 2 DOOR, BROUGHAM STATION WAGON, LS 2 DOOR, LS 2 DOOR NOTCHBACK, LS 4 DOOR, LS STATION WAGON, S 2 DOOR, STATION WAGON | 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.8L, 6 Cyl 4.3L Diesel
View related parts
Oldsmobile Cutlass Pump, Windshield Washer
Part Number: 22049373
Product Specifications
- Other Name: PUMP, Windshield Washer Pump; Front Washer Pump, Pump, Washer Pump, Wiper Arm
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1991 Oldsmobile Cutlass | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 2 DOOR NOTCHBACK, BROUGHAM 4 DOOR, BROUGHAM SL 2 DOOR, BROUGHAM STATION WAGON, CUTLASS CALAIS, CUTLASS CRUISER, LS 2 DOOR, LS 2 DOOR NOTCHBACK, LS 4 DOOR, LS STATION WAGON, S 2 DOOR, SL 2 DOOR, SL 4 DOOR, SL STATION WAGON, STATION WAGON | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.1L, 6 Cyl 3.3L, 6 Cyl 3.8L, 6 Cyl 4.3L Diesel, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
View related parts
Oldsmobile Cutlass Pump Asm,Rear Window Washer
Part Number: 22111440
Product Specifications
- Other Name: PUMP, Windshield Washer Pump; Front Washer Pump, Washer Pump
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Oldsmobile Cutlass | S 4 DOOR, S STATION WAGON, SL 4 DOOR, SL STATION WAGON | 4 Cyl 2.2L, 6 Cyl 3.1L
View related parts
Oldsmobile Cutlass Pump Assembly, Windshield Washer
Part Number: 22071780
Product Specifications
- Other Name: PUMP, Windshield Washer Pump; Pump, Washer Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1987 Oldsmobile Cutlass | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, CUTLASS CALAIS, CUTLASS CRUISER, LS 2 DOOR, LS 4 DOOR, LS STATION WAGON | 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.8L, 6 Cyl 4.3L Diesel, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel

Oldsmobile Cutlass Washer Pump

Each OEM Oldsmobile Cutlass Washer Pump we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Oldsmobile Cutlass Washer Pump Parts Questions & Experts Answers

Pump Kit,Windshield Washer W/ Seal
89025062
Q: How to remove and reinstall the rectangular and round motor types for the washer pump on Oldsmobile Cutlass?
A: The rectangular motor type for the washer pump involves removing it independently from the Wiper Motor by disconnecting the washer hoses and electrical wiring. The pump can be lifted off the motor after removing the mounting screws and the four lobe washer pump drive cam. The felt washer on the wiper shaft should be removed, followed by the solenoid assembly and ratchet dog. The ratchet wheel can be taken off by moving the spring out of the shaft groove. To separate the pump and pump actuator plate from the frame, the pump housing should be pulled towards the valve end. Reassembly and installation are the reverse of the removal procedure. For the round motor type, the washer hoses and wires should be disconnected from the pump relay. The plastic pump cover can be removed, and then the pump and frame can be withdrawn by removing the frame screws. The ratchet dog, pawl, ratchet spring, and other components should be removed. The relay coil and terminal board can be detached by chiseling off the tabs. The plastic pump housing can be removed by pulling it towards the valve end, and the valve can be separated from the housing by removing the screws. Reassembly should be done with the wiper motor in the 'Park' position.