How to remove and install an electric shift motor/actuator assembly from Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL's transfer case?

To remove the electric shift motor/4WD actuator assembly from a vehicle's transfer case, first raise the vehicle and place it securely on jackstands. Then, remove the stone shields from below the transfer case and unplug the shift motor electrical connector. Unscrew the retaining bolts and remove the assembly. To install, inspect the seal for damage and replace if necessary. Position the gasket and 4WD actuator in place on the transfer case and install the bolts, tightening them to the specified torque. Finally, reverse the removal steps.

How do you replace the shift motor from the axle tube on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

To remove the 4WD actuator from the axle tube, first raise the front of the vehicle and support it securely on jackstands. If equipped, remove the differential carrier splash shield. Then, disconnect the electrical connector from the 4WD actuator and unscrew the actuator from the axle tube. Before installing the actuator, coat the threads with RTV sealant and tighten it securely.

Genuine GMC Yukon 4WD Actuator

Four-Wheel Drive Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 4WD Actuators found

View related parts
GMC Yukon Actuator,Front Drive Axle
Part Number: 26060073
$138.82 MSRP: $241.60
You Save: $102.78 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: ACTUATOR, Front Drive Axle Shifter/Lock; Actuator, Switch, Switch Actuator
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2014 GMC Yukon | 1/2 TON, 3/4 TON, CLASSIC 2 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON, XL 1/2 TON, XL 3/4 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 5.7L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex, 8 Cyl 6.5L Diesel, 8 Cyl 8.1L
View related parts
GMC Yukon Actuator Assembly, Front Drive Axle
Part Number: 22876132
$151.20 MSRP: $263.16
You Save: $111.96 (43%)
ADD TO CART
Product Specifications
- Other Name: ACTUATOR, Front Drive Axle Shifter/Lock; Actuator, Engagement Switch
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 GMC Yukon | 1500 4 DOOR SUV, 4 DOOR, 4 DOOR SUV | 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
GMC Yukon Actuator Assembly, Front Drv Axle
Part Number: 84651328
$107.31 MSRP: $168.84
You Save: $61.53 (37%)
ADD TO CART
Product Specifications
- Other Name: Actuator
- Position: Front
- Replaces: 23243764
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | , YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 6 Cyl 3.0L Diesel, 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
GMC Yukon Actuator,Front Drive Axle
Part Number: 26013495
Product Specifications
- Other Name: ACTUATOR, Front Drive Axle Shifter/Lock; Actuator, Switch
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 GMC Yukon | CLASSIC 2 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON | 8 Cyl 5.7L, 8 Cyl 6.5L Diesel
View related parts
GMC Yukon Actuator Assembly, Front Drv Axle
Part Number: 84648804
$137.77 MSRP: $217.75
You Save: $79.98 (37%)
Product Specifications
- Other Name: Actuator
- Position: Front
- Replaced by: 85073905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 GMC Yukon | , YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 6 Cyl 3.0L Diesel, 8 Cyl 5.3L, 8 Cyl 6.2L

GMC Yukon 4WD Actuator

A significant component in the GMC Yukon is known as the 4WD Actuator it locks the differential and turns on the 4WD mode. It is normally activated by a single push button or rocker switch, thus offering the driver with a convenient method of increasing tractive ability in several circumstances. Although the source text does not again distinguish various types or design of the 4WD Actuator implemented in GMC Yukon automobiles over the period, it chiefly outlines how the actuator works. The primary function is still maintained as providing for the swift and efficient shifting to the 4WD mode with ultimate responsiveness for the requirements. All in all, the 4WD Actuator plays a significant role for the Yukon to perform great in robust terrains.

Each OEM GMC Yukon 4WD Actuator we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

GMC Yukon 4WD Actuator Parts Questions & Experts Answers

Actuator,Front Drive Axle
26060073
Q: How to remove and install an electric shift motor/actuator assembly from Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL's transfer case?
A: To remove the electric shift motor/4WD actuator assembly from a vehicle's Transfer Case, first raise the vehicle and place it securely on jackstands. Then, remove the stone shields from below the transfer case and unplug the shift motor electrical connector. Unscrew the retaining bolts and remove the assembly. To install, inspect the seal for damage and replace if necessary. Position the gasket and 4WD actuator in place on the transfer case and install the bolts, tightening them to the specified torque. Finally, reverse the removal steps.
Actuator,Front Drive Axle
26060073
Q: How do you replace the shift motor from the axle tube on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To remove the 4WD actuator from the axle tube, first raise the front of the vehicle and support it securely on jackstands. If equipped, remove the differential carrier splash shield. Then, disconnect the electrical connector from the 4WD actuator and unscrew the actuator from the axle tube. Before installing the actuator, coat the threads with RTV sealant and tighten it securely.