How do you remove the air intake duct for Chevrolet Equinox and GMC Terrain?

Begin the process of removing the air intake duct by disconnecting the PCV hose from the resonator on 2.4L engine models or the PCV fresh air tube from valve cover in V6 engine models. Next, undo the clamps at both ends of the intake duct and lift it off. To install, you only need to reverse this sequence. Similarly, to remove the air filter box, loosen its clamp and remove its duct from it. Then unplug MAF sensor's electrical connector and take out box mounting fastener so as to lift off box. Conversely, installation is just about reversing removal steps.

Genuine GMC Terrain Air Filter Box

Air Filter Housing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Filter Boxs found

View related parts
GMC Terrain Cleaner Assembly, Air
Part Number: 84040483
$95.02 MSRP: $142.06
You Save: $47.04 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Cleaner Assembly
- Replaces: 25899723
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2011 GMC Terrain | SLE2 SUV, SLT SUV | 6 Cyl 3.0L
View related parts
GMC Terrain Cleaner Assembly, Air
Part Number: 84040481
$115.46 MSRP: $173.40
You Save: $57.94 (34%)
Product Specifications
- Other Name: Air Cleaner Assembly
- Replaces: 20813714
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2011 GMC Terrain | SLE1 SUV, SLE2 SUV, SLT SUV | 4 Cyl 2.4L

GMC Terrain Air Filter Box Parts Questions & Experts Answers

Cleaner Assembly, Air
84040481
Q: How do you remove the air intake duct for Chevrolet Equinox and GMC Terrain?
A: Begin the process of removing the air intake duct by disconnecting the PCV hose from the resonator on 2.4L engine models or the PCV fresh air tube from valve cover in V6 engine models. Next, undo the clamps at both ends of the intake duct and lift it off. To install, you only need to reverse this sequence. Similarly, to remove the air filter box, loosen its clamp and remove its duct from it. Then unplug MAF sensor's electrical connector and take out box mounting fastener so as to lift off box. Conversely, installation is just about reversing removal steps.