How do you remove the window regulator?

To remove the window regulator, start by disconnecting the cable from the negative battery terminal on models with power components. Then, remove the door trim panel and water shield while ensuring the window glass is in the full-up position and secured with duct tape. Proceed to punch out the center pins of the rivets that hold the window regulator to the door frame and drill them out. For power window-equipped models, unplug the electrical connector. Finally, disengage the regulator from the window glass sash and lift it from the door. To install the new regulator, place it in position in the door and engage the guide channel assemblies. Secure it to the door using 3/16-inch rivets and a rivet tool. Plug in the electrical connector (if applicable) and install the door trim panel. Finally, reconnect the negative battery cable.

Genuine GMC Sonoma Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Window Regulators found

View related parts
GMC Sonoma Front Side Door Window Regulator Assembly
Part Number: 15041707
$90.03 MSRP: $161.48
You Save: $71.45 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Front Side Door Window ; Regulator Assembly, Frt S/D Wdo
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2004 GMC Sonoma | 4 DOOR, PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
GMC Sonoma Rear Side Door Window Regulator Assembly
Part Number: 5483148
$108.09 MSRP: $220.16
You Save: $112.07 (51%)
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Rear Side Door Window ; Regulator, Door And End Gate Window; Regulator, Window Regulator
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 GMC Sonoma | 4 DOOR, PICKUP | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
GMC Sonoma Rear Side Door Window Regulator Assembly
Part Number: 5483149
Product Specifications
- Other Name: Regulator Assembly, Rear Side Door Window
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 GMC Sonoma | 4 DOOR, PICKUP | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
GMC Sonoma Front Side Door Window Regulator
Part Number: 15041706
Product Specifications
- Other Name: Regulator,Front Side Door Window; Regulator, Window Regulator
- Position: Front
- Replaces: 15705141
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2004 GMC Sonoma | 4 DOOR, PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
GMC Sonoma Front Side Door Window Regulator
Part Number: 93386008
Product Specifications
- Other Name: Regulator,Front Side Door Window; Regulator, Window Regulator
- Position: Front
- Replaces: 05483147, 15705144, 5483147, 15043153
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2004 GMC Sonoma | 4 DOOR, PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
GMC Sonoma Front Side Door Window Regulator
Part Number: 93386009
Product Specifications
- Other Name: Regulator,Front Side Door Window; Regulator, Window Regulator
- Position: Front
- Replaces: 5483146, 05483146, 15043152
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2004 GMC Sonoma | 4 DOOR, PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L

GMC Sonoma Window Regulator Parts Questions & Experts Answers

Front Side Door Window Regulator
93386009
Q: How do you remove the window regulator?
A: To remove the window regulator, start by disconnecting the cable from the negative battery terminal on models with power components. Then, remove the door trim panel and water shield while ensuring the window glass is in the full-up position and secured with duct tape. Proceed to punch out the center pins of the rivets that hold the window regulator to the door frame and drill them out. For power window-equipped models, unplug the electrical connector. Finally, disengage the regulator from the window glass sash and lift it from the door. To install the new regulator, place it in position in the door and engage the guide channel assemblies. Secure it to the door using 3/16-inch rivets and a rivet tool. Plug in the electrical connector (if applicable) and install the door trim panel. Finally, reconnect the negative battery cable.