How to inspect and replace flexible brake hoses for Chevrolet Blazer,S10,GMC Jimmy and Sonoma?

About every six months, it is important to inspect the flexible hoses that connect the steel brake lines with the front and rear brake assemblies for any cracks, chafing, leaks, blisters, or other damage. This inspection should be done with the vehicle raised and securely placed on jackstands, using a light and mirror for a thorough check. If any of the above defects are found, the hose should be replaced with a new one. To replace the hose, start by cleaning any dirt away from the ends of the hose and disconnecting the brake line from the hose fitting, being careful not to bend the frame bracket or line. If necessary, soak the connections with penetrating oil. Remove the U-clip from the female fitting at the bracket and remove the hose from the bracket. Disconnect the hose from the caliper, discarding the copper washers on either side of the fitting. Attach the new brake hose to the caliper using new copper washers. Pass the female fitting through the frame or frame bracket, installing it with the least amount of twist in the hose. Install the U-clip in the female fitting at the frame bracket. Attach the brake line to the hose fitting using a back-up wrench on the fitting. Carefully check to ensure that the suspension or steering components do not make contact with the hose, and have an assistant push down on the vehicle and turn the steering wheel lock-to-lock during inspection. Afterward, bleed the brake system. When replacing brake lines, always use the correct parts and avoid using copper tubing. Purchase steel brake lines, preferably prefabricated ones with the tube ends already flared and fittings installed. Ensure that the new line is well supported in the brackets and has plenty of clearance between moving or hot components. After installation, check the master cylinder fluid level and add fluid as necessary. Finally, bleed the brake system and test the brakes carefully before placing the vehicle into normal operation.

Genuine GMC Sonoma Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

55 Brake Lines found

View related parts
GMC Sonoma Hose Asm,Rear Brake
Part Number: 19366755
$35.36 MSRP: $66.72
You Save: $31.36 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HOSE ASM,RR BRK; Brake Hose, Flex Hose
- Position: Rear
- Replaces: 22113466, 17989773
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-2003 GMC Sonoma | 4 DOOR, PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
GMC Sonoma Pipe,Brake (Bulk Tubing 5/16" 8Mm)
Part Number: 12541500
$33.77 MSRP: $53.13
You Save: $19.36 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Standard Parts; Cooler Line, Line, Oil Cooler Tube
- Replaces: 01324714, 1324714
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1997 GMC Sonoma | PICKUP | 4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
GMC Sonoma PIPE ASM FRT BRK
Part Number: 15715408
$21.59 MSRP: $25.16
You Save: $3.57 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PIPE, Hydraulic Brake
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 GMC Sonoma | PICKUP | 6 Cyl 4.3L
View related parts
GMC Sonoma Pipe Assembly, Brake Pressure Mod Valve Rear Brake
Part Number: 15051173
$55.86 MSRP: $100.20
You Save: $44.34 (45%)
Product Specifications
- Other Name: PIPE, Hydraulic Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 GMC Sonoma | 4 DOOR, PICKUP, PICKUP EXTENDED CAB | 6 Cyl 4.3L
View related parts
GMC Sonoma HOSE ASM,RR BRK
Part Number: 19366728
$34.25 MSRP: $61.44
You Save: $27.19 (45%)
Product Specifications
- Other Name: Brake Hose, Flex Hose
- Replaces: 22163464
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2004 GMC Sonoma | 4 DOOR, PICKUP, PICKUP EXTENDED CAB | 6 Cyl 4.3L
View related parts
GMC Sonoma PIPE, Vacuum Power Brake
Part Number: 10083128
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 GMC Sonoma | PICKUP | 4 Cyl 2.5L
View related parts
GMC Sonoma PIPE
Part Number: 15158214
Product Specifications
- Other Name: PIPE, Hydraulic Brake
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 GMC Sonoma | PICKUP | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
GMC Sonoma PIPE ASM FRT BRK COMB VLV
Part Number: 15614075
Product Specifications
- Other Name: PIPE, Hydraulic Brake
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1995 GMC Sonoma | PICKUP | 4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
GMC Sonoma Pipe Assembly, Rear Brk Frt
Part Number: 15638427
Product Specifications
- Other Name: PIPE, Hydraulic Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991 GMC Sonoma | PICKUP | 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
GMC Sonoma Pipe Assembly, Front Brake
Part Number: 15689561
Product Specifications
- Other Name: PIPE, Hydraulic Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 GMC Sonoma | PICKUP | 6 Cyl 4.3L
View related parts
GMC Sonoma Pipe Assembly, Front Brake
Part Number: 15715402
Product Specifications
- Other Name: PIPE, Hydraulic Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 GMC Sonoma | PICKUP | 4 Cyl 2.2L
View related parts
GMC Sonoma PIPE, Hydraulic Brake
Part Number: 15715406
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 GMC Sonoma | PICKUP | 6 Cyl 4.3L
View related parts
GMC Sonoma PIPE, Hydraulic Brake
Part Number: 15715420
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 GMC Sonoma | PICKUP | 6 Cyl 4.3L
View related parts
GMC Sonoma PIPE
Part Number: 15722016
Product Specifications
- Other Name: PIPE, Hydraulic Brake
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 GMC Sonoma | PICKUP | 6 Cyl 4.3L
View related parts
GMC Sonoma PIPE, Hydraulic Brake
Part Number: 15979486
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1997 GMC Sonoma | PICKUP | 4 Cyl 2.2L, 6 Cyl 4.3L
View related parts
GMC Sonoma PIPE, Hydraulic Brake
Part Number: 15990626
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 GMC Sonoma | PICKUP | 6 Cyl 4.3L
View related parts
GMC Sonoma Pipe Assembly, Front Brake Crossover
Part Number: 15561197
Product Specifications
- Other Name: PIPE, Hydraulic Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 GMC Sonoma | PICKUP | 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
GMC Sonoma Pipe Assembly, Power Brake Booster Vacuum
Part Number: 10069245
Product Specifications
- Other Name: PIPE
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 GMC Sonoma | PICKUP | 6 Cyl 2.8L
View related parts
GMC Sonoma Pipe Assembly, Power Brake Booster Vacuum
Part Number: 10218328
Product Specifications
- Other Name: PIPE, Vacuum Power Brake
- Replaces: 10118708
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1995 GMC Sonoma | PICKUP | 6 Cyl 4.3L
View related parts
GMC Sonoma Pipe Assembly, Front Brake
Part Number: 15990625
Product Specifications
- Other Name: PIPE, Hydraulic Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 GMC Sonoma | PICKUP | 6 Cyl 4.3L

| Page 1 of 3 |Next >

1-20 of 55 Results

GMC Sonoma Brake Line

The Brake Line in GMC Sonoma vehicles can be described as the line responsible for transporting brake fluid from the master cylinder to the brake caliper pistons so that hydraulic braking works. The metal brake lines are vulnerable to factors such as corrosion and mechanical impacts leading to flow of the brake fluid and low pressure. The brake hoses can also wear out physically and on the inside which can have a serious impact on the vehicle's breaks. Luckily, there are prebent brake line kits and direct replacement brake hoses where necessary and these are both random and corrosion free. Retracting the brake hoses with high quality braided stainless steel lines can help to address the complaint substantially for the performance roads uses.

Each OEM GMC Sonoma Brake Line we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

GMC Sonoma Brake Line Parts Questions & Experts Answers

Pipe,Brake (Bulk Tubing 5/16" 8Mm)
12541500
Q: How to inspect and replace flexible brake hoses for Chevrolet Blazer,S10,GMC Jimmy and Sonoma?
A: About every six months, it is important to inspect the flexible hoses that connect the steel brake lines with the front and rear brake assemblies for any cracks, chafing, leaks, blisters, or other damage. This inspection should be done with the vehicle raised and securely placed on jackstands, using a light and mirror for a thorough check. If any of the above defects are found, the hose should be replaced with a new one. To replace the hose, start by cleaning any dirt away from the ends of the hose and disconnecting the brake line from the hose fitting, being careful not to bend the frame bracket or line. If necessary, soak the connections with penetrating oil. Remove the U-clip from the female fitting at the bracket and remove the hose from the bracket. Disconnect the hose from the caliper, discarding the copper washers on either side of the fitting. Attach the new brake hose to the caliper using new copper washers. Pass the female fitting through the frame or frame bracket, installing it with the least amount of twist in the hose. Install the U-clip in the female fitting at the frame bracket. Attach the brake line to the hose fitting using a back-up wrench on the fitting. Carefully check to ensure that the suspension or steering components do not make contact with the hose, and have an assistant push down on the vehicle and turn the steering wheel lock-to-lock during inspection. Afterward, bleed the brake system. When replacing brake lines, always use the correct parts and avoid using copper tubing. Purchase steel brake lines, preferably prefabricated ones with the tube ends already flared and fittings installed. Ensure that the new line is well supported in the brackets and has plenty of clearance between moving or hot components. After installation, check the master cylinder fluid level and add fluid as necessary. Finally, bleed the brake system and test the brakes carefully before placing the vehicle into normal operation.