My Garage
My Account
Cart
Genuine GMC Sonoma Brake Calipers
Caliper- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
10 Brake Calipers found
GMC Sonoma Caliper Kit,Front Brake
Part Number: 18029813$17.00 MSRP: $23.36You Save: $6.36 (28%)Ships in 1-2 Business Days
GMC Sonoma Brake Calipers
Brake Calipers is one of the vital systems of GMC Sonoma's brake mechanism, its operation sees the brake pad clamped on the rotor to cause scratching and hinderance hence stopping the car. These calipers come in two main types: On whether the degrees of freedom themselves are fixed or free, there can be fixed degrees of freedom and free, or floating, degrees of freedom. Depending on the design of the calipers, the clamping can be done from both sides of the disc which makes the device much more effective though not as forgiving to the imperfection of the material. In floating calipers, nowadays utilized in most vehicles, the calipers rotate parallel to the disc's axis of rotation, and the single piston displaces the inside brake pad which slides the caliper to apply pressure on both sides of the disc. Nevertheless, floating calipers stick due to several reasons; hence, resulting in lower fuel economy, over-heated discs, and worn pads unevenly. A breakdown of the brake system in GMC Sonoma vehicles can therefore result from leakage, damage on the boot, worn out hardware or any other defect of the following part; Brake Caliper. There are also replacement calipers that include the bare essentials to top-of-the-line precision-manufactured calipers to fully-loaded calipers that come with new pistons, seals, boots, new hardware, and clips if you just want to do an overhaul job. Performance brake calipers are also available for persons who desire better braking efficiency and performance, caliper options from 1-piston to high 8-piston brake calipers fit daily driving or racing usages.
Each OEM GMC Sonoma Brake Calipers we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
GMC Sonoma Brake Calipers Parts Questions & Experts Answers
- Q: How to remove the Brake Caliper on GMC Sonoma?A: To remove the brake hose-to-caliper banjo fitting, first mark its position relative to the caliper and then remove the banjo bolt. Discard the old copper sealing washers and wrap a plastic bag around the hose end to prevent fluid loss and contamination. Next, remove the caliper mounting bolts and clean the caliper with brake system cleaner. Do not use kerosene or petroleum-based solvents. Place shop towels or a block of wood in the center of the caliper and use compressed air to force the piston out of the bore. Inspect the piston and caliper bore for any surface defects, replacing the piston if necessary. Pry out the piston seal and dust boot and discard them, as the overhaul kit will contain replacements. Clean the piston and cylinder bore with brake system cleaner, clean brake fluid, or denatured alcohol. Lubricate the new piston seal with clean brake fluid and position it in the cylinder groove using your fingers. For installation, install the new dust boot in the piston groove, dip the piston in clean brake fluid, and place it in the bore, depressing it to the bottom. Seat the boot in the caliper counterbore using a boot installation tool or blunt punch. Connect the brake hose to the caliper using new copper washers, aligning the union fitting with the marks made before disassembly. Finally, install the caliper, tighten the mounting bolts and brake hose fitting bolt to the specified torque, and bleed the front brake circuit.
