Other Name: MOTOR, Windshield Wiper Motor; Front Motor, Wiper Motor
Replaces: 12365360
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1999-2002 GMC Sierra | 1500 CREW CAB LONG BOX, 1500 EXTENDED CAB LONG BOX, 1500 EXTENDED CAB STANDARD BOX, 1500 REGULAR CAB LONG BOX, 1500 REGULAR CAB STANDARD BOX, 2500 CREW CAB LONG BOX, 2500 CREW CAB STANDARD BOX, 2500 EXTENDED CAB LONG BOX, 2500 EXTENDED CAB STANDARD BOX, 2500 REGULAR CAB, 3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS EXTENDED CAB 185.5, 3500 CHASSIS REGULAR CAB 161.5, 3500 CREW CAB, 3500 EXTENDED CAB, 3500 REGULAR CAB | 6 Cyl 4.3L, 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.6L Diesel, 8 Cyl 8.1L
GMC Sierra Wiper Motor
Each OEM GMC Sierra Wiper Motor we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
GMC Sierra Wiper Motor Parts Questions & Experts Answers
A: Now remove the windshield wiper motor by prying off the windshield wiper trim caps and removing the retaining nuts and washers. Mark where each wiper arm is in relation to its shaft, then take them off. Next, remove the cowl cover and disconnect the electrical connector of the motor. Remove mounting bolts that secure a motor as well as linkage assembly to a cowl and then lift it out of that area. Pry linkage from a crank arm of a motor also removing an actuator arm from its shaft. Finally, remove mounting screws for motors together with motors themselves. To install, repeat all steps in reverse order while aligning marks made on an actuator arm, motor shafts as well as wiper arms or rather wiper arm shafts. For rear wiper motor, first get rid of trim cap and retaining nut situated at wipers' arms; mark position occupied by this rod concerning your engine's propeller; withdraw it. After removing liftgate trim panel and detaching electrical fitting of engine one must consequently do away with fasteners holding it up. In order to put back just do opposite actions still focusing on any marks left on washers that are mounted on arms along with their central parts on which these arms were fixed before removal too.