My Garage
My Account
Cart
Genuine GMC Jimmy Turn Signal Flasher
Turn Signal Indicator Flasher- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Turn Signal Flashers found
GMC Jimmy Flasher,Hazard Lamp
Part Number: 19209674$17.23 MSRP: $25.52You Save: $8.29 (33%)Ships in 1-2 Business Days
GMC Jimmy Relay,Electronic Brake Control
Part Number: 12088594$12.60 MSRP: $26.68You Save: $14.08 (53%)
GMC Jimmy Flasher Assembly, Turn Signal Lamp
Part Number: 9442871$12.60 MSRP: $28.87You Save: $16.27 (57%)Ships in 1-2 Business Days
GMC Jimmy Flasher,Hazard Lamp & Turn Signal Lamp
Part Number: 11516051$41.08 MSRP: $81.52You Save: $40.44 (50%)Ships in 1-2 Business Days
GMC Jimmy Turn Signal Flasher
Each OEM GMC Jimmy Turn Signal Flasher we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
GMC Jimmy Turn Signal Flasher Parts Questions & Experts Answers
- Q: What is the location and function of the turn signal flasher and hazard flasher in a Chevrolet Blazer,S10,GMC Jimmy and Sonoma?A: The flasher for the turn signals is a small canister-shaped unit positioned under the dash beneath the knee bolster or behind the glove compartment on vehicles made in 1999 and after. It sits next to a huge wiring splice and is held by plastic strap. When it works, there should be an audible click sound accompanying its operations. Where one side's turn signals fail without that characteristic clicking noise of the flasher, then a busted signal bulb exists. In case both stop lights stay on without blinking, this could be due to a blown Fuse, a faulty flasher unit, a broken switch or loose or open connections. To replace flasher relay remove under-dash panel or knee bolster so as to unplug it from its socket. A new one must match the old in all regards. The hazard warning lamp assembly used for flashing all four turn signal lamps at once upon switching it on is situated inside instrument panel behind knee bolster or behind glove compartment on 1999 and later models too. It also abuts against large wire clamp and is held in place with plastic band. Checking procedure for hazard warning light unit resembles that of turn indicator unit described above. To replace it you will need to take off under-dash panel or knee bolster cover in order to unplug the flasher itself. The replacement lamp has to be exactly similar to the one being replaced.
- Q: How do you remove the Turn Signal Flasher on Chevrolet Blazer,S10,GMC Jimmy and Sonoma?A: To remove the switch of the turn signal, first of all disconnect the negative battery cable, then remove steering column covers and driver's knee bolster. Afterwards, remove the top two Torx screws securing a multi-function switch to a steering column. After that unclip the wire ties that secure it in place on other wires of the steering column. At the bottom of the steering column firewall bulkhead remove bolt holding large connections. Separate two multi-function switch connectors from large bulkhead connector. Remember that Multi-Function Switch and its harness should be replaced together as one unit. To install new switch just reverse removal process steps.
Related GMC Jimmy Parts
Browse by Year
2001 Turn Signal Flasher 2000 Turn Signal Flasher 1999 Turn Signal Flasher 1998 Turn Signal Flasher 1997 Turn Signal Flasher 1996 Turn Signal Flasher 1995 Turn Signal Flasher 1994 Turn Signal Flasher 1993 Turn Signal Flasher 1992 Turn Signal Flasher 1991 Turn Signal Flasher 1990 Turn Signal Flasher 1989 Turn Signal Flasher 1988 Turn Signal Flasher 1987 Turn Signal Flasher 1986 Turn Signal Flasher 1985 Turn Signal Flasher