How to replace a fuel filter for Chevrolet Blazer,S10,GM Jimmy and Sonoma?

Relieve the fuel system pressure. Raise the vehicle and support it securely on jackstands. Place a container, newspapers or rags under the fuel filter. Use two wrenches, one to steady the filter and the other to unscrew the fuel line nut, then separate the connections. Use two wrenches to loosen the fuel lines and detach if from the filter. If available, use a flare nut wrench on the fuel line nut fitting. On 1997 and later models one end of the fuel filter has a quick disconnect fitting-to remove the line squeeze the plastic clips on the fitting together and pull back on the line. It's a good idea to use a flarenut wrench because the wrap-around design gives it a better grip on the fuel line nut. Detach the filter from the bracket. Install the new filter and connect the fuel lines securely.

Genuine GMC Jimmy Fuel Filter

Gas Filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Fuel Filters found

View related parts
GMC Jimmy Filter,Fuel
Part Number: 25168594
$11.24 MSRP: $20.15
You Save: $8.91 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: FILTER, Engine Fuel Filter; Fuel Filter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2001 GMC Jimmy | 2 DOOR, 4 DOOR | 6 Cyl 4.3L
View related parts
GMC Jimmy Filter Kit,Fuel
Part Number: 25171792
Product Specifications
- Other Name: FILTER, Engine Fuel Filter; Filter, Fuel Filter
- Replaces: 25055052, 25121792, 25121915
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1997 GMC Jimmy | 1/2 TON, 2 DOOR, 4 DOOR | 6 Cyl 2.8L, 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel
View related parts
GMC Jimmy Filter,Fuel
Part Number: 25011765
Product Specifications
- Other Name: SEPARATOR, Engine Fuel Filter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1991 GMC Jimmy | 1/2 TON | 8 Cyl 6.2L Diesel
View related parts
GMC Jimmy FILTER ASM,FUEL
Part Number: 19332546
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1996 GMC Jimmy | 1/2 TON, 2 DOOR, 4 DOOR | 6 Cyl 4.3L, 8 Cyl 5.7L
View related parts
GMC Jimmy Filter Assembly, Fuel
Part Number: 10149548
Product Specifications
- Other Name: FILTER, Engine Fuel Filter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1991 GMC Jimmy | 1/2 TON | 8 Cyl 6.2L Diesel

GMC Jimmy Fuel Filter

The Fuel Filter in GMC Jimmy vehicles is a component used in the fuel supply system to protect the engine from such substance as dirt, rust, and water that could contribute to wearing of the components and poor performance. Ordinarily, the mentioned filters comprise of pleated filter paper cartridges to filter abrasive particulate matter for a smoother fuel flow and, thus, improved engine performance. It is recommended that the Fuel Filter should be checked and replaced if clogged to ensure that it does not affect the flow of fuel and consequently the procedures of the engine. In diesel engines, many special filters are also capable of emulsifying and then disposing of the water to fend off the fuel system. Through proper filtration the Fuel filter is very useful in prolonging the life of the engine and enhancing efficiency in GMC Jimmy vehicles.

Each OEM GMC Jimmy Fuel Filter we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

GMC Jimmy Fuel Filter Parts Questions & Experts Answers

Filter,Fuel
25168594
Q: How to replace a fuel filter for Chevrolet Blazer,S10,GM Jimmy and Sonoma?
A: Relieve the fuel system pressure. Raise the vehicle and support it securely on jackstands. Place a container, newspapers or rags under the fuel filter. Use two wrenches, one to steady the filter and the other to unscrew the fuel line nut, then separate the connections. Use two wrenches to loosen the fuel lines and detach if from the filter. If available, use a flare nut wrench on the fuel line nut fitting. On 1997 and later models one end of the fuel filter has a quick disconnect fitting-to remove the line squeeze the plastic clips on the fitting together and pull back on the line. It's a good idea to use a flarenut wrench because the wrap-around design gives it a better grip on the fuel line nut. Detach the filter from the bracket. Install the new filter and connect the fuel lines securely.