My Garage
My Account
Cart
Genuine GMC Canyon Fuel Tank
Gas Tank- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Fuel Tanks found
GMC Canyon Tank Assembly, Fuel
Part Number: 84860746$690.97 MSRP: $1042.17You Save: $351.20 (34%)Ships in 1-3 Business Days
GMC Canyon TANK ASM-FUEL
Part Number: 86508659$669.59 MSRP: $1009.95You Save: $340.36 (34%)Ships in 1-2 Business Days
GMC Canyon Fuel Tank
The Fuel Tank of GMC Canyon cars helps in fuel storage and contains the electric fuel pump and fuel gauge sender. It also operates in the manifold of an Evaporative Emission Control System (EVAP) to stop fuel vapors from escaping. These tanks are usually made of metal or stout plastics; the metal tanks corrode and rust while the plastic ones crack from heat and vibrations. The racing fuel cells are to be protected from puncturing and to avoid spilling the gas on impact and there are flexible bladders of reinforced rubber or a better material of coated fabrics. There are high capacity fuel tanks with a use of military grade polymer that can provide up to extra 500 miles of driving and come with configurations which are impossible with steel tanks and do not have problems like corrosion or cracking.
Each OEM GMC Canyon Fuel Tank we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
GMC Canyon Fuel Tank Parts Questions & Experts Answers
- Q: How do you remove and install a fuel tank for Chevrolet Colorado and GMC Canyon?A: If necessary, clean the fuel tank and areas surrounding the fuel lines and hoses to prevent contaminating the fuel system. Remove the fuel tank filler cap to relieve fuel tank pressure. Relieve the fuel system pressure. Disconnect the cable from the negative battery terminal. Using a siphoning kit (available at most auto parts stores), siphon the fuel into an approved gasoline container. Raise the vehicle and support it securely on jackstands. Remove the left rear fenderwell liner. Disconnect the fuel supply line (and return line on 2004 and 2005 models). On all models, disconnect the EVAP vapor lines from the vapor canister. Note: For information on quick-connect fitting disconnection. Remove the fuel filler hose from the tank. Disconnect the electrical connectors from the tank pressure sensor, Fuel Pump module and the EVAP vent valve. Position a transmission jack under the fuel tank and support the tank. There is one tank strap at the front that is over the tank, and one strap at the rear that goes under the tank. Unscrew the fuel tank strap bolts and remove the straps (Remove the fuel tank strap bolts-front strap bolt shown). Lower the jack and remove the tank from the vehicle. An assistant would be helpful. while doing this. Installation is the reverse of removal.
- Q: What are the precautions to take when dealing with fuel tank damage and cleaning for Chevrolet Colorado and GMC Canyon?A: The fuel tanks used in vehicles are not repairable. When they break, they need to be replaced. A professional with the appropriate training should clean the fuel tank, especially if it is contaminated by fuel, as this task is decisive and may be dangerous. Explosive fumes might still be found inside the fuel tank after cleaning and flushing processes are completed. If the fuel tank is removed from a car, do not put it in a place where there are sparks or open flames to spark fumes from its mouth. Special care should be taken in garages with gas appliances.
