Q: How do I remove and install a radio and speaker in Chevrolet Colorado and GMC Canyon?
A: To remove the radio, disconnect the negative battery cable and remove the center accessory trim plate from the instrument panel. Then, remove the mounting screws and pull the radio out. Disconnect the connectors and remove the radio. To install the radio, reverse the removal steps. For speaker removal, remove the door trim panel and speaker mounting screws. Pull the speaker out, disconnect the electrical connector, and remove the speaker. To install the speaker, follow the reverse of the removal steps. If your vehicle has a digital radio receiver, it may be located behind the glove box. Remove the glove box and instrument panel right-side end panel. Reach through the openings to remove the screws securing the radio receiver. Disconnect the electrical connectors, one of which requires pushing in a tab to release. To install the digital radio receiver, reverse the removal procedure.