Genuine GMC Acadia Power Steering Pump

GMC Acadia Power Steering Pump Parts Questions & Experts Answers

• Pump Assembly, P/S
  20954812
  Q: How do you remove the power steering pump?

  A: To remove the power steering pump, start by removing the fuel injection shroud and disconnecting the negative battery terminal. Then, raise the vehicle and support it on jackstands. Use a syringe or suction gun to remove as much fluid as possible from the power steering fluid reservoir, and place a drain pan underneath to catch any spills. Remove the drivebelt, steering gear heat shield, and rear bank catalytic converter. Disconnect the fluid feed hose and pressure line from the power steering pump, and remove the pump mounting bolts. Finally, remove the power steering pump from the vehicle. To install, reverse the removal steps, ensuring that the mounting bolts are tightened to the proper torque and the pressure line fitting is securely tightened. Fill the power steering reservoir with the recommended fluid and bleed the power steering system.