How do I remove the key lock cylinder and Ignition Switch?

To remove the ignition lock cylinder, disconnect the battery cable and remove the steering column covers. Insert the key into the cylinder and turn it to the RUN position. To remove the housing and switch, disconnect the battery cable and remove the covers, steering wheel, and switches. Detach electrical connectors from the switch. Remove the housing bolt and strap, then slide off the assembly. Finally, remove the switch from the housing. For installation, secure the switch in the housing and slide it onto the column. Install the strap and bolt.

Genuine GMC Acadia Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Switches found

View related parts
GMC Acadia Switch,Ignition & Start
Part Number: 20965947
$17.69 MSRP: $33.38
You Save: $15.69 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: SWITCH, Ignition Switch; Ignition Switch
- Replaces: 92184907
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2017 GMC Acadia | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
GMC Acadia Switch Assembly, On/Off Vehicle *Black
Part Number: 23400951
$20.91 MSRP: $39.46
You Save: $18.55 (48%)
ADD TO CART
Product Specifications
- Other Name: SWITCH, Ignition Switch; Ignition Switch, Start Button
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2021 GMC Acadia | DENALI SUV, SLE SUV, SLE2 & ALL TERRAIN SUV, SLE2 SUV, SLT & ALL TERRAIN SUV, SLT SUV, SLT2 SUV | 4 Cyl 2.0L, 4 Cyl 2.5L, 6 Cyl 3.6L

GMC Acadia Ignition Switch Parts Questions & Experts Answers

Switch Assembly, On/Off Vehicle *Black
23400951
Q: How do I remove the key lock cylinder and Ignition Switch?
A: To remove the ignition lock cylinder, disconnect the battery cable and remove the steering column covers. Insert the key into the cylinder and turn it to the RUN position. To remove the housing and switch, disconnect the battery cable and remove the covers, steering wheel, and switches. Detach electrical connectors from the switch. Remove the housing bolt and strap, then slide off the assembly. Finally, remove the switch from the housing. For installation, secure the switch in the housing and slide it onto the column. Install the strap and bolt.