Genuine GMC Acadia Door Lock Cylinder

Door Lock Cylinder Tumbler
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Lock Cylinders found

  • GMC Acadia Door Lock Cylinder - 20766969
    View related parts

    GMC Acadia Cylinder Kit,Front Side Door Lock(Uncoded)

    Part Number: 20766969
    $50.78 MSRP: $79.87
    You Save: $29.09 (37%)
    ADD TO CART
    Product Specifications
    • Other Name: CYLINDER KIT, Door Lock Cylinder; Lock Cylinder
    • Position: Front
    • Replaces: 25756120, 15871578, 15264797, 15800059
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2007-2017 GMC Acadia | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
  • GMC Acadia Door Lock Cylinder - 13590041
    View related parts

    GMC Acadia Front Side Door Lock Cylinder Kit (Uncoded)

    Part Number: 13590041
    $71.16 MSRP: $106.39
    You Save: $35.23 (34%)
    ADD TO CART
    Product Specifications
    • Other Name: Cylinder Kit, Front Side Door Lock (Uncoded); Control Rod, Cover, Lock Cylinder, Rod
    • Position: Front
    • Replaces: 13586486
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2017-2021 GMC Acadia | DENALI SUV, SLE SUV, SLE2 & ALL TERRAIN SUV, SLE2 SUV, SLT & ALL TERRAIN SUV, SLT SUV, SLT2 SUV | 4 Cyl 2.0L, 4 Cyl 2.5L, 6 Cyl 3.6L

GMC Acadia Door Lock Cylinder Parts Questions & Experts Answers

  • Q: How to remove the Door Handle,Door Latch Assembly and Door Lock Cylinder for Buick Enclave,Chevrolet Traverse and GMC Acadia?
    A: To remove the door latch, start by removing the door trim panel and water shield. Then, remove the retainers for the cable and disconnect the electrical connector from the latch. Detach the rods from the latch and remove the latch mounting fasteners. For installation, simply reverse the removal process. To remove the outside handle, open the door and remove the small access cover. Loosen the retainer but do not remove it. Pull the door handle out halfway and remove the small cover, then remove the handle. Installation is the reverse of removal. To remove the door lock cylinder, remove the door trim panel and plastic water shield. Remove the door handle and disconnect the latch rod from the lock cylinder and handle rod. Remove the fastener securing the door handle housing and release the retainer from the rear of the door lock cylinder. Push the lockout of the housing. Installation is the reverse of removal.

Related GMC Acadia Parts