How to replace the air filter element in a black plastic box mounted on the left side of the engine compartment?

At the specified intervals, the air filter element should be replaced with a new one. The air filter is housed in a black plastic box mounted on the left side of the engine compartment. Detach the PCV quick-disconnect fitting, if equipped. Disconnect the electrical connector from the Mass Air Flow/Intake Air Temperature (MAF/IAT) sensor. Detach the windshield washer hose from the filter housing cover. Loosen the hose clamp and detach the intake duct, then remove the filter housing cover screws. Remove the cover screws (six total). Pull up the housing cover, then lift the air filter element out of the housing. Lift up the cover and remove the filter element. Wipe out the inside of the air filter housing with a clean rag. Installation is the reverse of removal.

Genuine GMC Acadia Air Filter

Air Cleaner

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Air Filters found

View related parts
GMC Acadia Element, Air Cleaner
Part Number: 23321606
$39.15 MSRP: $70.22
You Save: $31.07 (45%)
ADD TO CART
Product Specifications
- Other Name: ELEMENT, Air Cleaner Intake; Air Filter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2023 GMC Acadia | DENALI SUV, SLE SUV, SLE2 & ALL TERRAIN SUV, SLE2 SUV, SLT & ALL TERRAIN SUV, SLT SUV, SLT2 SUV | 4 Cyl 2.0L, 4 Cyl 2.5L, 6 Cyl 3.6L
View related parts
GMC Acadia Element Assembly, Air Cleaner
Part Number: 15278634
$17.87 MSRP: $32.04
You Save: $14.17 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: ELEMENT, Air Cleaner Intake; Air Filter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2017 GMC Acadia | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
GMC Acadia Cleaner Assembly, Air
Part Number: 25947086
Product Specifications
- Other Name: CLEANER, Air Intake; Air Cleaner Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 GMC Acadia | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L

GMC Acadia Air Filter

It is whereby the Air Filter in GMC Acadia vehicles holds an essential function of ensuring that it captures dirt and debris that may harm the engine while ensuring that the car runs at its optimum power consumption. These filters need to be changed from time to time to ensure that there is no compromise to the airflow of the give engines. There are four normal type of GMC Acadia Air Filter: paper air filter for general use, foam filter for off-road, and oiled cotton gauze are for competition standard engine. The two performance filters deliver higher intake air flow rates as well as longer maintenance intervals thus boosting the engines' power and economy. It is advisable to check on the air filter frequently is required and especially if a car is being used in areas that take short roads with dusty surfaces or off-road.

Each OEM GMC Acadia Air Filter we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

GMC Acadia Air Filter Parts Questions & Experts Answers

Cleaner Assembly, Air
23323955
Q: How to replace the air filter element in a black plastic box mounted on the left side of the engine compartment?
A: At the specified intervals, the air filter element should be replaced with a new one. The air filter is housed in a black plastic box mounted on the left side of the engine compartment. Detach the PCV quick-disconnect fitting, if equipped. Disconnect the electrical connector from the Mass Air Flow/Intake Air Temperature (MAF/IAT) sensor. Detach the windshield washer hose from the filter housing cover. Loosen the hose clamp and detach the intake duct, then remove the filter housing cover screws. Remove the cover screws (six total). Pull up the housing cover, then lift the air filter element out of the housing. Lift up the cover and remove the filter element. Wipe out the inside of the air filter housing with a clean rag. Installation is the reverse of removal.