How do I remove the key lock cylinder and Ignition Switch?

To remove the ignition lock cylinder, disconnect the battery cable and remove the steering column covers. Insert the key into the cylinder and turn it to the RUN position. To remove the housing and switch, disconnect the battery cable and remove the covers, steering wheel, and switches. Detach electrical connectors from the switch. Remove the housing bolt and strap, then slide off the assembly. Finally, remove the switch from the housing. For installation, secure the switch in the housing and slide it onto the column. Install the strap and bolt.

Genuine Chevrolet Traverse Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Lock Cylinder found

View related parts
Chevrolet Traverse Cylinder Kit,Ignition Lock (Uncoded)
Part Number: 15871577
$91.75 MSRP: $144.38
You Save: $52.63 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Ignition Switch; Ignition Cylinder, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2017 Chevrolet Traverse | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L

Chevrolet Traverse Ignition Lock Cylinder Parts Questions & Experts Answers

Cylinder Kit,Ignition Lock (Uncoded)
15871577
Q: How do I remove the key lock cylinder and Ignition Switch?
A: To remove the ignition lock cylinder, disconnect the battery cable and remove the steering column covers. Insert the key into the cylinder and turn it to the RUN position. To remove the housing and switch, disconnect the battery cable and remove the covers, steering wheel, and switches. Detach electrical connectors from the switch. Remove the housing bolt and strap, then slide off the assembly. Finally, remove the switch from the housing. For installation, secure the switch in the housing and slide it onto the column. Install the strap and bolt.