How do you remove and install ignition coils on a Buick Enclave,Chevrolet Traverse and GMC Acadia?

Disconnect the cable from the negative battery terminal. Remove the engine cover. On 2008 and earlier models, remove the underhood fuse/relay box to access the rear bank ignition coils. On 2009 and later models, remove the intake manifold to access the front bank ignition coils. Disconnect the electrical connector from coil. Remove the ignition coil mounting fastener. Pull up and twist to remove the coil. Apply a little silicone dielectric compound to the inside of each boot before installing it. Installation is the reverse of removal.

Genuine Chevrolet Traverse Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ignition Coils found

View related parts
Chevrolet Traverse Coil Assembly, Ign
Part Number: 25202791
$56.37 MSRP: $118.42
You Save: $62.05 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Coil
- Replaces: 12654078, 12687140, 12652405
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Chevrolet Traverse | LT EXTENDED 4 DOOR SUV | 4 Cyl 2.0L
View related parts
Chevrolet Traverse COIL ASM,IGN
Part Number: 19418102
$89.47 MSRP: $187.96
You Save: $98.49 (53%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Ignition Coil, Spark Plug
- Replaces: 12583514, 12613057, 12629037
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009 Chevrolet Traverse | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Chevrolet Traverse Ignition Coil
Part Number: 12632479
$64.69 MSRP: $116.04
You Save: $51.35 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil,Ignition
- Replaces: 12590990, 12610626, 12618542
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2024 Chevrolet Traverse | 1LT/2LT EXTENDED 4 DOOR SUV, 1LZ/2LZ EXTENDED 4 DOOR SUV, LS EXTENDED 4 DOOR SUV, LT EXTENDED 4 DOOR SUV, LTZ EXTENDED 4 DOOR SUV, SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L

Chevrolet Traverse Ignition Coil

The Chevrolet Traverse Ignition Coil is one of the meaningful and significant components that involve in the ignition system of automobiles. This being the case, the ignition coil is capable of transforming the low voltage from the battery into high voltage power sufficient to provide spark to ignite the air/fuel mixture in the cylinders. This involves the use of two coils of insulated copper wire; the primary coil, the secondary coil, an iron core enclosed in a housing. Regardless of the ignition system used, the coil can be mounted on the cap of the distributor and a rotor or a straight connection with spark plugs. Misfiring of the ignition coil may cause a situation where the vehicle's engine will not start or will run poorly, will saturate the fuel line and injectors with raw fuel vs. a vapor, and have low fuel efficiency. It is highly recommended that such components like the ignition coil get inspected and maintained on a regular basis to avoid such problems.

Each OEM Chevrolet Traverse Ignition Coil we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Traverse Ignition Coil Parts Questions & Experts Answers

COIL ASM,IGN
19418102
Q: How do you remove and install ignition coils on a Buick Enclave,Chevrolet Traverse and GMC Acadia?
A: Disconnect the cable from the negative battery terminal. Remove the engine cover. On 2008 and earlier models, remove the underhood fuse/relay box to access the rear bank ignition coils. On 2009 and later models, remove the intake manifold to access the front bank ignition coils. Disconnect the electrical connector from coil. Remove the ignition coil mounting fastener. Pull up and twist to remove the coil. Apply a little silicone dielectric compound to the inside of each boot before installing it. Installation is the reverse of removal.