How to remove the air conditioning Condenser?

To remove the air conditioning system, start by recovering the refrigerant and disconnecting the negative battery terminal. Then, remove the front bumper cover, support, and hood latch, followed by the front bumper impact absorber. Disconnect the refrigerant lines from the condenser, making sure to cap all fittings to prevent dirt or moisture entry. If it's a 2013 or later model, detach the air conditioning refrigerant heat exchanger from the condenser. Pinch the fastening tabs at the top of the condenser to disconnect it from the radiator. Carefully lift the condenser to release the lower retaining tabs and separate it from the radiator, being cautious not to damage the fins. For installation, connect the air conditioning refrigerant heat exchanger to the condenser using new O-rings, and then reverse the removal steps. Tighten the line-fitting mounting bolts to the specified torque and add fresh refrigerant oil if a new condenser is being installed. Finally, have the system evacuated, charged, and leak tested.

Genuine Chevrolet Traverse A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 A/C Condensers found

View related parts
Chevrolet Traverse Condenser Assembly, A/C
Part Number: 22918340
$192.02 MSRP: $288.31
You Save: $96.29 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CONDENSER, A/C Condenser; Condenser
- Replaces: 20995673, 25975431, 25923532, 15226649
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 Chevrolet Traverse | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Chevrolet Traverse Condenser Assembly, A/C
Part Number: 23479280
$230.33 MSRP: $345.86
You Save: $115.53 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CONDENSER, A/C Condenser; Condenser
- Replaces: 22931656, 23428278
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2017 Chevrolet Traverse | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Chevrolet Traverse Condenser Assembly, A/C
Part Number: 84725047
$152.91 MSRP: $229.60
You Save: $76.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser
- Replaced by: 86515466
- Replaces: 84397526, 84473267, 84212781, 84569930
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2021 Chevrolet Traverse | LS EXTENDED 4 DOOR SUV, LT EXTENDED 4 DOOR SUV, LTZ EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Chevrolet Traverse Condenser Assembly, A/C
Part Number: 84569932
$158.93 MSRP: $238.63
You Save: $79.70 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser
- Replaces: 84473269, 84397530, 84212783
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Chevrolet Traverse | LT EXTENDED 4 DOOR SUV | 4 Cyl 2.0L

Chevrolet Traverse A/C Condenser Parts Questions & Experts Answers

Condenser Assembly, A/C
23479280
Q: How to remove the air conditioning Condenser?
A: To remove the air conditioning system, start by recovering the refrigerant and disconnecting the negative battery terminal. Then, remove the front bumper cover, support, and hood latch, followed by the front bumper impact absorber. Disconnect the refrigerant lines from the condenser, making sure to cap all fittings to prevent dirt or moisture entry. If it's a 2013 or later model, detach the air conditioning refrigerant heat exchanger from the condenser. Pinch the fastening tabs at the top of the condenser to disconnect it from the Radiator. Carefully lift the condenser to release the lower retaining tabs and separate it from the radiator, being cautious not to damage the fins. For installation, connect the air conditioning refrigerant heat exchanger to the condenser using new O-rings, and then reverse the removal steps. Tighten the line-fitting mounting bolts to the specified torque and add fresh refrigerant oil if a new condenser is being installed. Finally, have the system evacuated, charged, and leak tested.