How do you remove the oil level tube and reinstall the oil pan in six cylinder engine on Chevrolet Trailblazer?

First, to undo the oil level tube, turn anticlockwise the top two bolts of air conditioning compressor a little, and the last step, turn the front wheel lug nuts. Lay the car down and make sure it is stable then remove the front wheels like this: Then, uninstall the under vehicle splash shield, the steering gear cross members and so on. For 4WD models the driveaxles and the intermediate shaft have to be detached and the front driveshaft has to be disconnected from the differential companion flange. Remove the engine oil and detach the transmission cooler lines from a clip on a side of the engine. On 4WD models remove the differential from the oil pan and fasten it to the frame with wire or rope of high tensile strength. If equipped, delete the access plugs used to cover the fasteners at the rear part of the oil pan and then delete the oil pan to transmission bell housing bolts and the remaining bolts used to hold the oil pan to the engine block. Take two oil pan bolts and screw them into the jackscrew holes in the oil pan and tighten until you get the pan off the block, wash the pan with solvent. Feel the oil pan for sharp edges in the sealing areas and look for threads on the oil drain hole. For installation, apply a 3/16-inch bead of RTV sealant to the engine block at the pan sealing area and the pan should be installed within ten minutes of sealant application. Position the oil pan on the block, thread the bolts, while engaging the pan to transmission bell housing bolts, as well as the oil pan to engine block bolts until all tightened to the torque specifications. Last, replace the engine oil filter and refill the crankcase with the right kind and amount of oil to its requirement.

Genuine Chevrolet Trailblazer Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Oil Pans found

View related parts
Chevrolet Trailblazer Pan Assembly, Lwr Oil
Part Number: 55509997
$31.13 MSRP: $48.97
You Save: $17.84 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pan
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2025 Chevrolet Trailblazer | 4 DOOR EXT, LEVEL II 4 DOOR EXTENDED, LEVEL III 4DOOR EXTENDED | 3 Cyl 1.2L
View related parts
Chevrolet Trailblazer Pan Assembly, Oil
Part Number: 12613437
$301.33 MSRP: $476.27
You Save: $174.94 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: PAN, Engine Oil; Oil Pan
- Replaces: 12579723, 12624620
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2009 Chevrolet Trailblazer | 4 DOOR, 4 DOOR EXT | 8 Cyl 5.3L, 8 Cyl 6.0L
View related parts
Chevrolet Trailblazer PAN ASM-OIL
Part Number: 12718806
$32.10 MSRP: $50.51
You Save: $18.41 (37%)
ADD TO CART
Product Specifications
- Other Name: Oil Pan
- Replaces: 12710474, 12698031
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2025 Chevrolet Trailblazer | 4 DOOR EXT, LEVEL II 4 DOOR EXTENDED, LEVEL III 4DOOR EXTENDED, LEVEL IV 4 DOOR EXTENDED, LEVEL V 4 DOOR EXTENDED | 3 Cyl 1.3L
View related parts
Chevrolet Trailblazer Pan,Oil
Part Number: 12584321
$220.43 MSRP: $348.26
You Save: $127.83 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: PAN, Engine Oil; Oil Pan
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2009 Chevrolet Trailblazer | 4 DOOR, 4 DOOR EXT | 6 Cyl 4.2L
View related parts
Chevrolet Trailblazer Pan Assembly, Lwr Oil
Part Number: 25204203
$60.11 MSRP: $94.58
You Save: $34.47 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pan
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Chevrolet Trailblazer | 4 DOOR EXT, LEVEL II 4 DOOR EXTENDED, LEVEL III 4DOOR EXTENDED | 3 Cyl 1.2L
View related parts
Chevrolet Trailblazer Pan Assembly, Oil
Part Number: 24577551
Product Specifications
- Other Name: PAN, Engine Oil; Oil Pan
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Chevrolet Trailblazer | 4 DOOR, 4 DOOR EXT | 6 Cyl 4.2L

Chevrolet Trailblazer Oil Pan

Originally used for storing oil, the Oil Pan present in Chevrolet Trailblazer containerised systems hold the necessary amount of oil for maintaining the lubrication and cooling of the engaged parts of a car's engine. Based on the wet sump type, the Oil Pan, receives the oil drawn through the pickup tube by the oil pump and circulates the oil in the engine before it falls to the pan. This design is crucial in order to achieve a high level of performance of the engine under different circumstances. In the past, the Chevrolet Trailblazer Oil Pans were produced by stamping thin steel to provide a shallow bed pan However, employing the latest cast aluminum on the engine is common on many engine models. The above evolution in the choice of materials promotes durability and efficiency. Whereas the essential role is the same, the change from steel to aluminum can be seen as a sign of the increase in the degree of engineering in the production of Chevrolet Trailblazer vehicles, the reliability of the Oil Pan system is fortified.

Each OEM Chevrolet Trailblazer Oil Pan we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Trailblazer Oil Pan Parts Questions & Experts Answers

Pan Assembly, Oil
12613437
Q: How do you remove the oil level tube and reinstall the oil pan in six cylinder engine on Chevrolet Trailblazer?
A: First, to undo the oil level tube, turn anticlockwise the top two bolts of air conditioning compressor a little, and the last step, turn the front wheel lug nuts. Lay the car down and make sure it is stable then remove the front wheels like this: Then, uninstall the under vehicle splash shield, the steering gear cross members and so on. For 4WD models the driveaxles and the intermediate shaft have to be detached and the front driveshaft has to be disconnected from the differential companion flange. Remove the engine oil and detach the transmission cooler lines from a clip on a side of the engine. On 4WD models remove the differential from the oil pan and fasten it to the frame with wire or rope of high tensile strength. If equipped, delete the access plugs used to cover the fasteners at the rear part of the oil pan and then delete the oil pan to transmission bell housing bolts and the remaining bolts used to hold the oil pan to the engine block. Take two oil pan bolts and screw them into the jackscrew holes in the oil pan and tighten until you get the pan off the block, wash the pan with solvent. Feel the oil pan for sharp edges in the sealing areas and look for threads on the oil drain hole. For installation, apply a 3/16-inch bead of RTV sealant to the engine block at the pan sealing area and the pan should be installed within ten minutes of sealant application. Position the oil pan on the block, thread the bolts, while engaging the pan to transmission bell housing bolts, as well as the oil pan to engine block bolts until all tightened to the torque specifications. Last, replace the engine oil filter and refill the crankcase with the right kind and amount of oil to its requirement.